Maxx-world TL5130 Mode D'emploi page 20

EN
Handling the device properly
• Only use the device in enclosed areas.
• Only connect the device to a properly installed
socket. The socket must be easily accessible
after the device has been connected. The
mains voltage must correspond to the data on
the nameplate of the device. Only use proper
extension cords, whose technical data corre-
spond to those of the device.
• Check the device for damages prior to use.
The device may not be used if it, the mains
cord or plug exhibit visible damages. Do not
use the device if it malfunctions, has fallen
down or in water.
• If the device is defective, do not attempt to
repair the device, the mains cord or the plug
yourself. Electrical equipment may only be
repaired by qualifi ed professionals. In the
event of damage, contact the customer ser-
vice department.
• Do not use any additional accessories. Only
use the enclosed accessories from the man-
ufacturer.
• Turn the device off and pull the mains plug
out of the socket
20