Leotec LEMP3FM02 Manuel De L'utilisateur page 11

! Only the professional personnel are allowed to dismantle the product.
Faults
No power and No
display
FM radio refuses to
work
FM noise after power
on
Figure 2
Troubleshooting
3. Check whether the fuse tube is disconnected
or need to be replaced (figure 2 )
4. Check whether the voltage is 12V.
Check whether the frequency of radio is
consistent with the player
5. Check whether the frequency of radio is
consistent with the palyer
6. Select the station-free frequency
7. The song has fault, please select another song
to play
It may eliminate the noise by increasing the
volume, if the sound is distorted, please turn down
the volume
Solutions