auna PRO UHF200F Mode D'emploi page 22

EN
22
Problem
Loud noises or noises
can be heard.
The transmitter cannot
be turned on.
Possible cause
The receiver screen
or indicator light will
indicate "RF Signal".
The screen or power
indicator blinks.
Press the On/Off
button and try to
restart the unit.
Suggested solution
Remove nearby
sources of
interference.
Replace the
transmitter batteries.
If you use many sets
together, increase the
working frequency
interval of the system.
The batteries are
empty, replace them.
Replace the batteries.
After a few seconds,
press the On/Off
button again.