MSI Z270 GAMING M5 Présentation Rapide page 49

CPU Base Clock Apply Mode [Auto]*
f
Sets the applying mode for adjusted CPU base clock.
[Auto] This setting will be configured automatically by BIOS.
[Next Boot] CPU will run the adjusted CPU base clock at next boot.
[Immediate] CPU runs the adjusted CPU base clock immediately.
[During Boot] CPU will run the adjusted CPU base clock during boot.
Clockgen Features
f
Press Enter to enter the sub-menu. Sets the detailed clockgen features.
fDynamic Frequency Control [Disabled]
When enabled, it allows CPU to operate different base clock frequency steps
dynamically according to CPU loading. This item will be disabled when the Dynamic
Frequency Search is enabled.
fDFC Baseline (MHz) [Auto]
Manual set initial base clock frequency for Dynamic Frequency Control. This item
will be available when the Dynamic Frequency Control is enabled.
fThreshold 1~3 (A) [Auto]
Sets the CPU loading threshold for Dynamic Frequency Control. When the CPU
loading reach to a set value of Threshold 1/ 2/ 3, and the CPU will run the base
clock that set in the Level 1/ 2/ 3 BCLK field. These items will appear when the
Dynamic Frequency Control is enabled.
fLevel 1~3 BCLK (MHz) [Auto]
Sets the base clock frequency for Dynamic Frequency Control function. When the
CPU loading reach to a set value in Threshold 1/ 2/ 3 field, and the CPU will run
the base clock of Level 1/ 2/ 3 BCLK. These items will appear when the Dynamic
Frequency Control is enabled.
fDynamic Frequency Search [Disabled]
Enables or disables the base clock optimization for CPU. This item will be disabled
when the Dynamic Frequency Control is enabled.
[Enabled] Run the CPU BCLK optimization.
[Disabled] Disables this function.
fDynamic Frequency Search Mode [Once]
Allows CPU to run base clock optimization either once or every booting. This item
will be available when the Dynamic Frequency Search is enabled.
[Once]
[Each Power On] Always run CPU BCLK optimization on every boot.
fDynamic Frequency Search Step (MHz) [Auto]
Sets a value for each step of base clock optimization. If set to Auto, BIOS will
configure this setting automatically. This item will be available when the Dynamic
Frequency Search is enabled.
fBCLK Amplitude [Auto]
Sets the value for BCLK Amplitude for overclocking. Higher value might benefit to
get higher overclocking values.
Run CPU BCLK optimization once only on next boot.
39
BIOS Setup