HP 10/100 3Com 3C905B-TX Guide D'installation page 10

CAUTION
HP 10/100 3Com 3C905B-TX Network Interface Card Installation Guide
Overview of the Installation Procedure
Non-Supported Network Drivers
The following network drivers are provided on the EtherDisk diskettes
but not supported by Hewlett-Packard:
Network Operating
System
Netware 4.1 Server
Banyan VINES
Artisoft LANtastic
IBM LAN SERVER (DOS)
IBM LAN SERVER (OS/2)
DEC PATHWORKS
Overview of the Installation Procedure
Your PC and network interface card can be permanently damaged by
static electricity. Before handling the card, touch the unpainted part of
your PC's metal chassis. Maintain grounding by wearing a wrist strap
attached to the chassis. Handle the card by its backplate and top edge.
Do not touch the edge connector.
Installing the 3C905B-TX NIC is a 4-step process. You need to:
1 Install the card in your PC.
2 Connect the card to the network.
3 Update LAN-specific fields in the HP PC Setup utility.
4 Install the driver software.
6 English
README (for driver
installation)
NETWARE.41X
BANYAN.TXT
LANTASTK.TXT
LANSRVR.TXT
LANSRVR.TXT
PATHWORK.TXT
Network Driver Name
3C90X.LAN
EL90X.DOS
EL90X.DOS
EL90X.DOS
EL90X.OS2
EL90X.DOS (DOS) and
3C90X.COM (Netware)