Accessories - GMC ROS150 Mode D'emploi

• Do not continue to use worn, torn or heavily clogged
sanding sheets.
• Do not touch the moving sanding sheet.
• Ensure that you have removed foreign objects such as
nails and screws from the work before commencing
sanding.
• Rags, cloths, cord, string and the like should never be left
around the work area.
GB
Wear goggles
Wear ear muffs
Wear a breathing mask

Accessories

The GMC ROS150CF Dual Random Orbital Sander is
supplied with the following accessories as standard:
• Ø150mm Sanding base (fitted)
• Ø125mm Sanding base
• 1 Sandpaper sheet (Ø150mm X 80 grit)
• Allen key
• Dust extraction adaptor
• Dust canister
• Spare set of 2 carbon brushes
• Instruction manual
Unpacking
Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
6