Treatment Procedure; Course Of Treatment - TriPollar STOP Eye Black Edition Mode D'emploi

9

TREATMENT PROCEDURE

COURSE OF TREATMENT

. Treatment duration is approximately 4 minutes per
1
area.
. For optimal results, use your TriPollar Stop Eye device
2
2-3 times a week for a period of 6-8 weeks.
. Make sure you have at least one day interval between
3
treatments.
. In order to maintain long term results after you have
4
finished the full course of treatments, it is recommended
that you use your TriPollar Stop Eye device 2-4 times
a month or as needed.
TREATMENT PROCEDURE
. Charge the device so that its battery is fully charged
1
and its LED indicator is steady blue.
2. Cleanse and dry the treatment area.
. TriPollar Preparation Balm must be used throughout
3
treatment. Spread an even layer over the entire
treatment area. In case you feel that the balm has
been absorbed during the treatment, spread an
additional layer of TriPollar Preparation Balm.
. Remove the protective cover from the device. Turn
4
TriPollar Stop Eye ON by short pressing the Power
Button (FIG.6). Make sure the green indicator LED
appears.
FIG.6
5. Place the device on your skin ensuring that all 4
electrodes are touching the skin. For best results, all
four electrodes must be in full contact with the skin
during treatment.
FIG.7