Table des Matières
Publicité
5 - PARTI DI RICAMBIO
Per una perfetta manutenzione della vostra
sedia sono a vostra disposizione i pezzi di
ricambio. Le parti soggette ad usura possono
essere acquistate dal vostro rivenditore
abituale oppure possono essere ordinate
direttamente all'azienda.
6 - ALTRI PRODOTTI
FIAM Vi propone un'ampia scelta di mobili
pieghevoli per l'interno e per l'esterno. La
gamma completa è visionabile all'indirizzo
internet www.fiam.it, o presso il vostro
rivenditore abituale.
7 - OMOLOGAZIONE
Il prodotto è stato concepito e realizzato in
conformità dei requisiti di sicurezza europei
vigenti secondo la norma EN581.
ENG
1 - OPERATING INSTRUCTIONS
Place the item on stable ground. Open
with care to avoid crushing your fingers. To
change the position of the backrest, slightly
close the chair and turn the hook a little
before extracting it (see drawing). To put the
hook back in, proceed as above in reverse
order. Pay attention to placing the two hooks
at the same height.
IMPORTANT: In order to use this item in utter
safety, ensure it is correctly open as per the
instructions. FIAM disclaims any liability in the
event of disputes caused by failure to comply
with this recommendation.
2 - CONDITIONS FOR USE
This product is only for private and leisure
use. FIAM disclaims any liability and any
warranty in the event of professional use not
agreed beforehand.
8
The item is designed and made for "normally
foreseeable" use, which involves:
- Adhering to the load it has been designed
for, i.e. 120 kg maximum dynamic load.
Simultaneous use by two people is to be
avoided, even only to momentarily or partially
rest against it.
- Sitting gently on the chair, without letting
yourself drop into it.
- Use by children being monitored by adults.
- Regular maintenance of the item and
periodic checks, and if required, replacement
of the parts subject to wear.
- Storing the item away from weathering in a
dry place when not in use.
It is recommended not to leave the product
exposed to water for a long time and to dry it
in the sun if that should happen, ensuring no
water is left standing within the structure.
Normal wear (i.e. scratching, rust,
discolouring) of the parts exposed to
weathering or subject to movement, cannot
be considered a manufacturing defect. Upon
purchasing, it is recommended to assess
the type and place of use of the product,
choosing the most appropriate materials for
the specific need.
The products with painted iron frame are
recommended for use on grass or non-
sensitive flooring (rusty water might leak out
of the tubes if left out in the rain). For use on
fragile flooring it is recommended to opt for
the aluminium product.
3 - WARRANTY
This FIAM product has been designed to give
you the highest degree of satisfaction and
safety. It is guaranteed for two years against
any manufacturing defect. This warranty
does not cover misuse of the product (see
conditions of use). Having ascertained the
defect, FIAM shall provide the replacement
parts, repair or replace the product free of
charge.
Publicité
Table des Matières
