Snooze Function - i-Star IS-ACO1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
relevant Alarm button (13) or (14) to confirm the time and to go
to sound source setting.
4. To set the alarm sound source: Press the BACKWARD
FORWARD button
alarm sound source. A red LED indicator will appear beside the
corresponding symbol alarm
your selection (it will appear on the left side of the screen for
Alarm 1 and on the right side for Alarm 2) . Then press the
relevant Alarm button (13) or (14) to confirm the time and to go
to the alarm frequency setting.
5. To set alarm frequency: Press the BACKWARD
FORWARD button
1-1 = on a selected day only*, 1-5 = Monday to Friday,
1-7 = Everyday, 6-7 = Weekend only
*Press the relevant Alarm button (12) or (13) when this option is
selected. Then press BACKWARD
to select a specific day for the alarm activation (e.g. 1 = Monday,
2 = Tuesday).
Once an alarm is set, the alarm will activate automatically with the
the sound as indicated, alarm or radio, as indicated on the left side
of the clock screen for Alarm 1 and on the right side for Alarm 2.
Turning the alarms on or off (make sure the unit is in
STANDBY mode) :
ALARM 1
(13) or ALARM 2
respective alarm. The Alarm 1 or Alarm 2 indicator (alarm or radio)
will switch on when the alarm is enabled.
Switching off a sounding alarm
• Press AL OFF button (15) to switch off a sounding alarm.
• When the alarm sounds, the corresponding Alarm 1 or Alarm 2
indicator, alarm

Snooze function

To temporarily silence a sounding alarm, press the SNOOZE
button (3). The alarm (radio or beep) will restart again when the
snooze period of 9 minutes is over.
The corresponding Alarm 1 or Alarm 2 indicator, alarm
will flash on the display during the snooze period.
To cancel the snooze period and the alarm, press the ALARM OFF
button (15).
PROJECTION ALARM CLOCK RADIO - User Guide
6
>
(12) to select the alarm
(5 or 7) or radio
>
(12) to select the alarm frequency:
<
(11) or FORWARD button
When the clock time is displayed, press the
(14) button to enable or disable the
or radio , will flash on the clock screen.
www.philex.com
<
(11) or
or radio
as the
(6 or 8) to show
<
(11) or
>
(12)
or radio ,

Publicité

Table des Matières
loading

Table des Matières