Remote Controller; Remote Controller Specifications; Performance Feature; Introduction Of Function Button On The Remote Controller - Lennox COMFORT Instructions D'installation

REMOTE CONTROLLER

Remote Controller Specifications

Rated Voltage
Lowest Voltage of CPU Emitting Signal
Reaching Distance Signal Range
Environment

Performance Feature

1. Operating Mod: COOL, HEAT, DRY, FAN and AUTO.
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range: 17 ºC - 30 ºC.
4. LCD (Liquid Cristal Display of all functions.

Introduction of Function Button on the Remote Controller

Fig. 1
1. TEMP Button : Push the button to make the indoor setting temperature decrease, or
adjust the Timer in the anti-clockwise direction.
2. MODE Select Button: Each time you push the button, a mode is selected in a sequence
that goes from AUTO, COOL, DRY, HEAT and FAN, as the following figure:
AUTO COOL
NOTE: HEAT only for Heat Pump
3.0V (Alkaline dry batteries LR03 X 2)
2.0V
8 m (when using 3.0 voltage, it Gets 11 m)
-5 ºC ~ 60 ºC
Set temperature ºC
AUTO
COOL
DRY
HEAT
FAN
HIGH
MED
LOW
▼ TEMP. ▲
MODE
ON/OOF
FAN SPEED
SWING
ECONOMIC RUNNING
TIMER
RESET
LOCK
CANCEL
DRY HEAT FAN –
5