BASETech CLT Mode D'emploi page 3

Operating Instructions
Telescopable Camping Light CLT
Item No. 1575759
Intended Use
This device can be used as a portable light source and power bank for charging mobile devices.
A status indicator lets you know how much battery power is left. It can be hung as a lamp, used
as a torch, or secured to a metal surface via the magnetic base. Two LED modes (steady white
and red strobe) can be selected.
The device has input short-circuit protection and overload protection.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture must be avoided
under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, or other hazards. Read the instructions
carefully and store them in a safe place. Make this product available to third parties only
together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• Lamp
• Cable (USB-A to Micro USB-B)
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or
scan the QR code shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
• Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Attention, LED light:
- Do not look direct ly into the LED light!
- Do not look into the beam directly or with optical instruments!
b) Rechargeable Batteries
• The rechargeable battery is permanently built into the product and cannot be
replaced.
• Never damage the rechargeable battery. Damaging the casing of the rechargeable
battery might cause an explosion or a fire!
• Never short-circuit the contacts of the rechargeable battery. Do not throw the
battery or the product into fire. There is a danger of fire and explosion!
• Charge the rechargeable battery regularly, even if you are not using the product.
Due to the rechargeable battery technology being used, you do not need to
discharge the rechargeable battery first.
• Never charge the rechargeable battery of the product unattended.
• When charging, place the product on a surface that is not heat-sensitive. It is
normal that a certain amount of heat is generated during charging.
Operating Elements
1 2
4 5
1 Hanger
2 Lens cover
3 Lamp
4 USB ports (USB-A / Micro USB-B)
Operation
Before using the lamp, make sure the hanger (1) is securely fastened (rotate lens
cover (2) clockwise). Do not over tighten as this may cause damage.
One short press of the power button
LED lights indicate a 100% charge. (25% green), (50%, 75%, 100% blue).
a) Charging the Battery
Use a power adapter to charge the battery. This product draws a charging current up
to 1 A from the USB port. Make sure that your USB power source/charger supports
this current before connecting to the USB port. Otherwise, your USB power source/
charger may be damaged. Do not use the USB-A 2.0 / 3.0 ports on your computer
to charge the internal battery as the current supplied by those ports may not be
sufficient.
• Access the USB ports by pulling down the magnetic base (6).
• Connect one end of the charging cable to the Micro USB-B (4) charging port, and the other
end to a suitable USB-A power adaptor.
Make sure the power adapter supports the required charging current.
• The battery status LEDs (8) will light up and indicate remaining battery levels.
When recharging the static LED(s) will indicate the level of stored charge (25%
green), (50%, 75%, 100% blue). When the battery is fully recharged all LED lights
will be solid.
b) Light Modes
• Press and hold power button to turn the device ON / OFF.
• Short press the power button to cycle between red strobe LED and white LED.
c) Power Bank
• Charge a mobile device via the USB-A charging port.
• Access the USB ports by pulling down the magnetic base (6).
• Connect one end of your charging cable to the USB-A (4) charging port, and the other end to
the charging port on your mobile device.
• Press the power button to begin charging.
• The battery status LEDs (8) will light up to indicate remaining battery levels.
3
6 7 8
5 Rubber grip
6 Magnetic base
7 (power / mode) button
8 Battery status LEDs
will activate the battery status LED (8). Four