Cleaning And Maintenance - EXALTA EL-301 Manuel D'instruction

should always be off. Choose and attached the cutting guide according
to the hair length you prefer. The cutting length is shown in the inner side
of each cutting guide. In order to put the preferred cutting guide, just
attached it in the supports

CLEANING AND MAINTENANCE

Before starting cleaning the appliance, always switch it off and unplug it.
Never immerse the appliance in water. Clean the unit with a damp and soft
cloth. Never use detergents and solvents to clean the appliance.
After having used the appliance remove the cutting guide and using the
cleaning brush to clean the body of the device, in order to remove any hair
from the cutting blade. In order to grant a long and good performance to
the appliance, it is advisable to clean and oil often the appliance.
For an easy cleaning it is possible to remove the cutting blades. Open the
cutting unit by pushing it backwards (as shown in the pictures).
Remove hair from the cutting blade using the cleaning brush, put 2 o 3
oil drops and reassemble the cutting unit. To replace the blades move the
13