Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
▶
CPU Under Voltage Protection [Auto]
Sets the voltage limit for CPU under-voltage protection. If set to "Auto", BIOS will
configure this setting automatically. Higher voltage provides less protection and may
damage the system.
▶
CPU Over Current Protection [Auto]
Sets the current limit for CPU over-current protection. If set to "Auto", BIOS will
configure this setting automatically. Higher percentage provides less protection and
may damage the system.
▶
Phase Over Current Protection [Enabled]
Enables or disables the phase over-current protection.
[Enabled]
Sets the current limit on the phase for over-current protection.
[Disabled]
Disables this function.
▶
CPU Switching Frequency [Auto]
Sets the PWM working speed to stabilize CPU Core voltage and minimize ripple
range. Increasing the PWM working speed will cause higher temperature of MOSFET.
So please make sure a cooling solution is well-prepared for MOSFET before you
increase the value. If set to "Auto", BIOS will configure this setting automatically.
▶
CPU VRM Over Temperature Protection [Enabled]
Enables or disables the CPU VRM over-temperature protection.
[Enabled]
Sets the temperature limit on CPU VRM for over-temperature protec-
tion.
[Disabled]
Disables this function.
▶
Digital Compensation Level [Auto]
Sets the current compensation level for CPU PWM when the MOS phases are
changed. If set to "Auto", BIOS will configure this setting automatically. Higher
compensation level provides more overclocking ability.
▶
Imon Overwrite [Auto]
Sets the Imon current for CPU.
[Auto]
This setting will be configured automatically by BIOS.
[Quarter]
Sets the Imon current into quarter.
[Half]
Sets the Imon current into half.
[Disabled]
Sets the default values for Imon current.
▶
Transient Boost [Disabled]
Enables or disables the transient boost.
[Enabled]
Enables this function may lead into a stable system under heavy sys-
tem loading.
[Disabled]
Disables this function.
▶
SVID Communication [Auto]
Enables or disables SVID (Serial Voltage Identification) support.
[Auto]
This setting will be configured automatically by BIOS.
[Enabled]
PWM phase will be changed dynamically according to the CPU SVID
(Serial Voltage Identification).
[Disabled]
Disables SVID (Serial Voltage Identification) support.
En-34
Publicité
Table des Matières
