AA Aquarium AAUV9W Guide Rapide page 8

TROUBLE SHOOTING GUIDELINES:
SYMPTOM
Slow water; or the filter
pump doesn't work;
If the UV lamp
doesn't work
If there's still too
much algae
UV lamp assembly
To see more great "AA" products,
please visit us at
www.aa-aquarium.com
Comments and Inquiries,
please write to us at
info@aa-aquarium.com
SOLUTION
- Clean Blue inlet filter of debris
- Clean the filter pump (See "Maintenance")
- Check the 2 pin plug to the connection box.
- If the LED on the control box is OFF, a new UV Lamp
Assembly is required.
- If both pump AND lamp don't work, connect the pump to the
adaptor directly - if the pump can operate then a new Control
Box is required.
- For larger aquariums (over 200L / 50 US Ga for 9W and over
400L / 100US Ga for 24W) a single UV may not be enough.
Please put 2 UV device into your aquarium.
- Minimize your "lights on" time. (14hours max) Fish need time
to rest and algae growth is prompted by lighting.
- AA's Algae Cure (Model: AA003M) also helps to control algae growth.
Male plug
Female plug
UV lamp assembly
Ring suction
cup
Male plug
Female plug
Suction
cup plate