Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

INSTALLER:
Leave this manual with the appliance.
CONSUMER:
Retain this manual for future reference.
WARNING
If not installed, operated and maintained in
accordance with the manufacturer's instruc-
tions, this product could expose you to sub-
stances in fuel or from fuel combustion which
can cause death or serious illness.
WARNING
Improper installation, adjustment, alteration,
service or maintenance can cause injury or
property damage. Read the installation, operat-
ing and maintenance instructions thoroughly
before installing or servicing this equipment.
— Installation and service must be per-
formed by a qualified installer, service
agency or the gas supplier.
INSTALLATION INSTRUCTIONS
AND OWNER'S MANUAL
OUTDOOR LINEAR
GAS FIREPLACE
MODELS
OLL48FP12S(N,P)-2
OLL48SP12S(N,P)-2
WARNING
For Outdoor Use Only.
WARNING
If the information in these instructions are
not followed exactly, a fire or explosion may
result causing property damage, personal
injury or loss of life.
DANGER
If you smell gas:
1.
Shut off gas to the fireplace.
2.
Extinguish any open flame.
3.
If odor continues, keep away from the fireplace and im-
mediately call your gas supplier or fire department.
WARNING
Do not store or use gasoline or other flammable vapors and
liquids in the vicinity of this or any other appliance.
An propane-cylinder not connected for use shall not be
stored in the vicinity of this or any other appliance.
GAS-FIRED
Page 1

Publicité

Chapitres

Table des Matières
loading

Sommaire des Matières pour Empire OLL48FP12S

  • Page 1 OUTDOOR LINEAR Leave this manual with the appliance. GAS FIREPLACE GAS-FIRED CONSUMER: MODELS Retain this manual for future reference. OLL48FP12S(N,P)-2 OLL48SP12S(N,P)-2 WARNING WARNING If not installed, operated and maintained in accordance with the manufacturer's instruc- For Outdoor Use Only. tions, this product could expose you to sub-...
  • Page 2: Before You Start

    HARDWARE PACK CONTENTS #10-32 X 1/2" STAINLESS HEX HEAD SCREW 14 - OLL48FP12S(N,P) #10-32 X ½” STAINLESS HEX HEAD SCREW (16) #10-32 X ½” STAINLESS HEX HEAD SCREW (16) 28 - OLL48SP12S(N,P) 1-1/4"...
  • Page 3: Table Des Matières

    Maintenance..........................24 Troubleshooting ........................25 Master Parts Distributor List ....................26 How To Order Repair Parts ....................... 26 OLL48FP12S Parts List ......................28 OLL48FP12S Parts View ......................29 OLL48SP12S Parts List......................30 OLL48SP12S Parts View ......................31 Important Safety Information ....................32 Safety Information For Users Of Propane Gas ...............
  • Page 4: Introduction

    When installed on surfaces where water may collect or cause 3. Installer should show owner how to start and operate outdoor damage: Empire Comfort Systems recommends a slope of 1/8 to fireplace. 1/4 in. per foot towards the drain port suggested. The fireplace can Always consult your local Building Department regarding regulations, be shimmed level.
  • Page 5: Specifications

    SPECIFICATIONS Model OLL48(FP,SP)12SP (Propane) OLL48(FP,SP)12SN (Natural) Gas Input BTU/Hr Maximum 55,000 55,000 Gas Input BTU/Hr Medium 45,000 45,000 Gas Input BTU/Hr Minimum 35,000 35,000 Orifice Air Shutter Setting 3/8 in. Open 1/16 in. Open Manifold Pressure 11 in. W.C. 4-1/2 in. W.C. ACCESSORIES DECORATIVE CRUSHED GLASS Required Decorative Crushed Glass Media Kits (8 Sq.
  • Page 6: Combustible Materials

    Television Considerations Installing a television above a fireplace has become increasingly popular; however, the area above any fireplace gets hot and most TV manufacturers recommend against placing their products near a heat source. If you install a television above this fireplace, Empire Comfort Sys- tems accepts no responsibility for damage or injuries. Follow the television manufacturer’s installation instructions, including any recommendations regarding proximity to heat sources. If you have a TV above your fireplace, turn off the fireplace and let it cool completely before servicing or touching any buttons on the TV.
  • Page 7: Clearances

    CLEARANCES Figure 4 Front and Side View of Non-Combustible Panel to Opening on Fireplace's Face NOTE: Recommended installation if using 6 in. or smaller tiles or finishing materials. Figure 5 Front View and Side Profile of Non-Combustible Panel to Top of Fireplace NOTE: Recommended installation if using 6-in. or larger tiles or finishing materials. Note for Figures 4 and 5: If installing the wall board in the flush face configuration, trim the two top panels to 16-1/2 in. x 26-3/4 in. The smaller non-combustible panels will not be needed. 35305-8-0818 Page 7...
  • Page 8: Fireplace Dimensions

    FIREPLACE DIMENSIONS OLL48FP OLL48SP INDEX DIMENSION DESCRIPTION LETTER Dimensions in Inches The maximum height of firebox face (excluding standoffs) 24-5/16 24-5/16 The maximum width of the firebox face (excluding nailing flanges) 51-3/4 51-3/4 The maximum depth of the firebox 19-1/16 22-5/16 The height of the firebox opening 16-3/16 16-3/16 The width of the firebox opening The interior depth of the firebox (not shown) 22-9/32 The rear exterior width of the firebox (not shown) 51-3/4 51-3/4 The height to the firebox standoffs 16-1/2 16-1/2 Width from the left side of the box to the centerline of vent Depth from back of box to centerline of top vent Height from the bottom of the box to the gas line opening 2-9/16...
  • Page 9: Planning Installation

    PLANNING INSTALLATION What to Consider Before Installing Outdoor Fireplace Enclosure Requirements 1. Verify fireplace gas type and gas supply type are the same. Do not install fireplace until all necessary provisions are made for 2. Look for a location where combustibles will not interfere. combustion and ventilation air. Consult the written instructions 120V GFI power outlet will be needed for LED lights provided with the fireplace for information concerning combustion Choose a location for gas shutoff valve. and ventilation air.
  • Page 10 Water Drainage Requirement (Contact your screen manufacturer or screen dealer to Provisions must be made to drain water away from the unit. An determine your screens open area). optional drain pan can be purchased from your Empire Dealer to fit under the fireplace. If installing the optional drain pan, it must WARNING be installed prior to installing the fireplace. For more information, Improper installation, adjustment, alteration, service or refer to the installation instructions supplied with the drain pan.
  • Page 11 PLANNING INSTALLATION Electrical Considerations CAUTION All wiring should be done by a qualified electrician and shall be in compliance with all local, city and state building codes. Before making the electrical connection, make sure that the main power supply is disconnected. The fireplace, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code ANSI/NFPA 70 (Latest Edition).
  • Page 12: Fireplace Framing And Installation

    FIREPLACE FRAMING AND INSTALLATION FRAMING & INSTALLATION Unpacking the Fireplace Before completing the framing and installing fireplace, provide a After removal of the cardboard carton, remove the band hold- path for water drainage out of the fireplace. ing the corner posts, non-combustible board and top mounting standoffs to the fireplace. Set the non-combustible board and top Determine if the optional accessory drain pan will be used.
  • Page 13: Framing & Installation

    FIREPLACE FRAMING AND INSTALLATION FRAMING & INSTALLATION 6. Locate the top standoffs (three for single-sided fireplaces To connect the gas line and install the electrical connection, and six for see-through fireplaces). Bend mounting feet and the burner assembly must be tilted upward in the fireplace. attach to the top of the fireplace with two #10-32x1/2 hex To lift the burner assembly, remove the control door by open- screws each. ing the door and lifting it upward to disengage the slots on the door from the pivot pins..
  • Page 14 FIREPLACE FRAMING AND INSTALLATION FRAMING & INSTALLATION 10. Lift front of burner assembly and tilt upwards and toward the back of the fireplace. Retrieve the two supports from inside the fireplace and place one each side against the front cor- ners of the cabinet bottom and under the front corners of the control panel. PROP SUPPORT IN FOUR CORNERS Figure 19 11. Install gas and electrical supplies to fireplace. See page 16 for gas supply requirements.
  • Page 15: Electrical Supply

    FIREPLACE FRAMING AND INSTALLATION ELECTRICAL SUPPLY CAUTION All wiring should be done by a qualified electrician and shall be in compliance with all local, city and state building codes. Before making the electrical connection, make sure that the main power supply is disconnected. The fireplace, when installed, must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National Electrical Code ANSI/NFPA 70 (Latest Edition).
  • Page 16: Gas Supply

    FIREPLACE FRAMING AND INSTALLATION GAS SUPPLY • Solid fuels shall not be burned in this fireplace. into the gas line that is capped on the bottom in which condensation and foreign particles may collect. • The maximum gas inlet supply pressure is 11 in. for Propane and 10.5 in. for Natural. The use of the following gas connectors is recommended: —...
  • Page 17: Propane Gas Cylinder Information

    FIREPLACE FRAMING AND INSTALLATION PROPANE GAS CYLINDER INFORMATION WARNING WARNING If these instructions are not followed exactly, a fire caus- A fire will result if the gas supply hose makes contact with ing death or serious injury may occur. the underside of the fireplace. Propane Cylinder Specifications Propane Gas This fireplace can be used with a non-disposable self-contained...
  • Page 18 FIREPLACE FRAMING AND INSTALLATION PROPANE-GAS CYLINDER INFORMATION Enclosures For Propane Gas Supply Systems The enclosure for the Propane Gas cylinder shall isolate the Enclosures for Propane Gas supply cylinders shall be ventilated cylinder from the burner compartment to provide: by openings at the level of the cylinder valve and at floor level. Shielding from heat radiation;...
  • Page 19: Finishing

    FIREPLACE FRAMING AND INSTALLATION FINISHING 1. After gas and electrical hookup is completed, lower and The fireplace can also be installed with panels flush with the face of the fireplace. See Figure 27. In this application, the two secure the burner assembly (leave two supports in bottom of fireplace for future use) with the two screws removed in Step top non-combustible panels (provided) are required above the 9 on page 13. fireplace. Outside of this area including the sides outside of the 2. Install the glass wind panel (two used on see-through fire- fireplace's metal may be any weatherproof wall board.
  • Page 20 FIREPLACE FRAMING AND INSTALLATION FINISHING Crushed Glass Installation Decorative glass droplets may be added, but can not be used Ensure the burner cover screens are still properly installed, fully near or over the burner. See Figure 29. Neither glass nor drop- covering the LED openings.
  • Page 21: Lighting Instructions

    LIGHTING INSTRUCTIONS FOR YOUR SAFETY READ BEFORE LIGHTING WARNING If you do not follow these instructions exactly, a fire or explosion may result causing property damage, personal injury, or loss of life. A. BEFORE LIGHTING, smell around the appliance area for B.
  • Page 22: Main Burner Flame Characteristics

    MAIN BURNER FLAME CHARACTERISTICS Figure 31 - Correct Flame Propane Figure 29 WARNING NEVER operate fireplace with an optional weather door in place. Figure 32 - Correct Flame Natural In normal operation on high after 10 to 15 minutes, the flame ap- pearance should be several tongues of yellow flames. NOTE: All flames will be random by design, flame height will go up and down. During manufacturing, fabricating and shipping, various components of this fireplace are treated with certain oils, films or bonding agents.
  • Page 23: Operation Instructions/Flame Appearance

    OPERATION INSTRUCTIONS/FLAME APPEARANCE LED Brightness Button Press the Brightness Button to activate the LED lights and to cycle LED Intensity from High to Low to Off. 1 – On – High 2 – Medium 3 – Low 4 – Off Use the Brightness Button in conjunction with the Mode Button to create unique looks.
  • Page 24: Wiring

    WIRING Label all wires prior to disconnection when servicing controls. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing. LED STRIP LED STRIP JUNCTION BOX TRANSFORMER BLACK LEFT BUTTON BLACK BLACK BRIGHTNESS BLACK RIGHT BUTTON BLACK BLACK MODE BLACK...
  • Page 25: Maintenance

    MAINTENANCE Keep the control compartment and burner area surrounding the PERIODIC CLEANING – Refer to parts diagram for location of burner clean. items discussed below. • Do not use cleaning fluid to clean any part of fireplace. Always keep the fireplace area clear and free from combustible • Overtime the crushed glass may break down into small pieces materials, gasoline, and other flammable vapors and liquids. that could clog the main burner ports. Remove fine glass Never obstruct the flow of combustion and ventilation air. Keep the particles away from burner ports.
  • Page 26: Troubleshooting

    TROUBLESHOOTING SYMPTOMS - POSSIBLE CAUSES AND CORRECTIONS Turn fireplace OFF and allow to cool before servicing. Only a qualified service person should service and repair the fireplace. Fireplace produces unwanted odors. If burning at main burner orifice occurs (a loud, roaring a. Fireplace burning vapors from paint, hair spray, glues, etc. blow torch noise). - Ventilate area. Stop using odor causing products while a. You must turn off burner assembly and contact a qualified fireplace is running.
  • Page 27: Master Parts Distributor List

    MASTER PARTS DISTRIBUTOR LIST To Order Parts Under Warranty, please contact your local Empire dealer. See the dealer locator at www.empirecomfort. com. To provide warranty service, your dealer will need your name and address, purchase date and serial number, and the nature of the problem with the unit.
  • Page 28: Oll48Fp12S Parts List

    OLL48FP12S PARTS LIST USE ONLY MANUFACTURER'S REPLACEMENT PARTS. USE OF ANY OTHER PARTS COULD CAUSE INJURY OR DEATH. QTY REQ QTY REQ INDEX PART INDEX PART DESCRIPTION DESCRIPTION Natural Propane Natural Propane BRACKET TOP REGULATOR 4.5 34181 R7160 MOUNTING W.C. NATURAL...
  • Page 29: Oll48Fp12S Parts View

    OLL48FP12S PARTS VIEW 35305-8-0818 Page 29...
  • Page 30: Oll48Sp12S Parts List

    OLL48SP12S PARTS LIST USE ONLY MANUFACTURER'S REPLACEMENT PARTS. USE OF ANY OTHER PARTS COULD CAUSE INJURY OR DEATH. QTY REQ QTY REQ INDEX PART INDEX PART DESCRIPTION DESCRIPTION Natural Propane Natural Propane BRACKET TOP REGULATOR 4.5 W.C. 34181 R7160 MOUNTING NATURAL NONCOMBUSTIBLE FITTING BRASS...
  • Page 31: Oll48Sp12S Parts View

    OLL48SP12S PARTS VIEW 35305-8-0818 Page 31...
  • Page 32: Important Safety Information

    IMPORTANT SAFETY INFORMATION • Installer: Please leave these instructions with the owner DANGER: Indicates a hazardous situation which, if not avoid- for future reference ed, will result in death or serious injury. • This unit complies with ANSI Z21.97/CSA 2.41 for Outdoor WARNING: Indicates a hazardous situation which, if not Gas Fireplaces.
  • Page 33: Safety Information For Users Of Propane Gas

    SAFETY INFORMATION FOR USERS OF PROPANE GAS Propane is a flammable gas which can cause fires and explo- SOME POINTS TO REMEMBER sions. In its natural state, propane is odorless and colorless. • Learn to recognize the odor of Propane Gas. Your local Propane You may not know all the following safety precautions which Gas Dealer can give you a “Scratch and Sniff” pamphlet. Use can protect both you and your family from an accident.
  • Page 34 FIREPLACE SERVICE HISTORY Date Dealer Name Service Technician Name Service Performed/Notes Page 34 35305-8-0818...
  • Page 35: Warranty Terms

    WARRANTY TERMS Empire Comfort Systems Inc. warranties this hearth product to be free from defects at the time of purchase and for the periods specified below. Hearth products must be installed by a qualified technician and must be maintained and operated safely, in accordance with the instructions in the owner’s manual. This warranty applies to the original purchaser only and is not transferable. All warranty repairs must be accomplished by a qualified gas appliance technician.
  • Page 36 Empire Comfort Systems Inc. Belleville, IL If you have a general question about our products, please e-mail us at info@empirecomfort.com. If you have a service or repair question, please contact your dealer. www.empirecomfort.com Page 36 35305-8-0818...
  • Page 37: Foyer À Gaz Linéaire Extérieur

    FOYER À GAZ INSTALLATEUR LINÉAIRE EXTÉRIEUR Laisser ce manuel avec le foyer. GAS-FIRED CONSOMMATEUR: MODÈLE OLL48FP12S(N,P)-2 Garder ce manuel pour référence ultérieure. OLL48SP12S(N,P)-2 AVERTISSEMENT AVERTISSEMENT S’il n’est pas installé, utilisé et entretenu selon Pour usage extérieur seulement. les instructions du fabricant, ce produit pour- rait vous exposer à...
  • Page 38: Avant De Commencer

    CONTENU DU JEU DE QUINCAILLERIE #10-32 X 1/2 PO VIS À TÊTE HEXAGONALE ACIER INOXYDABLE 14 - OLL48FP12S(N,P) #10-32 X ½” STAINLESS HEX HEAD SCREW (16) 28 - OLL48SP12S(N,P) VIS PHILLIPS 1-1/4 PO POUR CLOISON SÈCHE 33 - OLL48FP12S(N,P) 1-1/4”...
  • Page 39 DÉPANNAGE ..........................25 LISTE DES DISTRIBUTEURS DE PIÈCES PRINCIPAUX ............26 COMMENT COMMANDER DES PIÈCES DE RECHANGE ............26 OLL48FP12S LISTE DES PIÈCES .................... 28 OLL48FP12S VUE DES PIÈCES ....................29 OLL48SP12S LISTE DES PIÈCES .................... 30 OLL48SP12S VUE DES PIÈCES ....................31 INFORMATIONS DE SÉCURITÉ...
  • Page 40: Introduction

    Contactez le fabricant ou votre société de à l’humidité. gaz avant de changer la taille de l’injecteur/orifice. Lorsqu’il est installé sur des murs extérieurs : Empire Comfort Installations pour le gaz de tête de puits Systems recommande que le caniveau du foyer soit construit à...
  • Page 41: Spécifications

    SPÉCIFICATIONS Modèle OLL48(FP,SP)12SP (Propane) OLL48(FP,SP)12SN (Naturel) Entrée de gaz BTU/H maximum 55 000 55 000 Entrée de gaz BTU/H moyenne 45 000 45 000 Entrée de gaz BTU/H minimum 35 000 35 000 Orifice n° 44 n° 24 Réglage d’obturateur d’air 3/8 po ouvert 1/16 po ouvert Pression de collecteur...
  • Page 42: Matériaux Combustibles

    Si vous installez une télévision au-dessus de ce foyer, soyez avisé que Empire Comfort Systems n’accepte aucune responsabilité en cas de dommage ou blessures. Suivre les directives d’installation du fabricant de télévision ainsi que toutes recommandations se rapportant à...
  • Page 43 DÉGAGEMENTS Figure 4 Vue devant et latérale du panneau non combustible à l’ouverture sur la façade du foyer Remarque : il est recommandé d’installer des tuiles ou des matériaux de finition de 6 po ou plus petits. Figure 5 Vue devant et profil latéral du panneau non combustible au-dessus du foyer Remarque : il est recommandé d’installer des tuiles ou des matériaux de finition de 6 po ou plus grands. Remarque concernant les figures 4 et 5 : si le panneau mural est installé avec la façade affleurante, couper les deux panneaux supérieurs à...
  • Page 44: Dimensions Du Foyer

    DIMENSIONS DU FOYER OLL48FP OLL48SP LETTRE DE DESCRIPTION DE LA DIMENSION RÉPERTOIRE Dimensions en pouces La hauteur maximale de la façade du foyer (excluant les entretoises) 24-5/16 24-5/16 La largeur maximale de la façade du foyer (excluant les brides de clouage) 51-3/4 51-3/4 La profondeur maximale du foyer...
  • Page 45: Planifier L'installation

    PLANIFIER L’INSTALLATION Ce dont il faut tenir compte avant l’installation Exigences pour boîtier de foyer extérieur 1. Vérifier que le type du foyer au gaz et le type d’alimentation en Ne pas installer le foyer tant que toutes les mesures n’ont pas gaz sont les mêmes. été effectuées à l’égard de la combustion et l’air de ventilation. Trouver un endroit où...
  • Page 46 Empire qui s’installe sous le foyer. Si un bac d’écoulement en option est installé, il faut le faire avant d’installer le foyer. Pour...
  • Page 47 PLANNING INSTALLATION Considérations électriques ATTENTION Tous les câblages doivent être effectués par un électricien qualifié et être conformes à tous les codes du bâtiment locaux, munici- paux et provinciaux en vigueur. Avant d’effectuer le raccordement électrique, s’assurer que l’alimentation électrique principale est débranchée. Le foyer, lors de son installation, doit être élec- triquement relié...
  • Page 48: Encadrement Et Installation De Foyer

    ENCADREMENT ET INSTALLATION DE FOYER CADRAGE ET INSTALLATION Déballage du foyer Avant de terminer l’ossature et d’installer le foyer, fournir un chemin Après avoir enlevé la boîte en carton, retirer la bande qui retient pour éloigner l’écoulement d’eau du foyer. les poteaux de coin, le panneau non combustible et les entretois- es de montage du foyer.
  • Page 49: Cadrage Et Installation

    ENCADREMENT ET INSTALLATION DE FOYER CADRAGE ET INSTALLATION Repérer les entretoises du dessus (trois pour un foyer à Pour raccorder la conduite de gaz et installer la connexion façade simple et six pour les foyers à deux faces). Plier les électrique, le brûleur doit être incliné...
  • Page 50 ENCADREMENT ET INSTALLATION DE FOYER CADRAGE ET INSTALLATION 10. Soulever le devant de l’ensemble du brûleur et incliner vers le haut et l’arrière du foyer. Récupérer les deux supports à l’intérieur du foyer et placer de chaque côté contre les coins avant au bas de l’armoire et sous les coins avant du pan- neau de contrôle.
  • Page 51: Alimentation Électrique

    ENCADREMENT ET INSTALLATION DE FOYER ALIMENTATION ÉLECTRIQUE ATTENTION Tous les câblages doivent être effectués par un électricien qualifié et être conformes à tous les codes du bâtiment locaux, municipaux et provinciaux en vigueur. Avant d’effectuer le rac- cordement électrique, s’assurer que l’alimentation électrique principale est débranchée.
  • Page 52: Alimentation En Gaz

    ENCADREMENT ET INSTALLATION DE FOYER ALIMENTATION EN GAZ • Les combustibles solides ne doivent pas être brûlés dans ce Ne jamais utiliser de flamme nue pour détecter les fuites. Pour foyer. effectuer l’essai de pression, débrancher le foyer de la conduite •...
  • Page 53: Information Sur Le Cylindre De Gaz Propane

    ENCADREMENT ET INSTALLATION DE FOYER INFORMATION SUR LE CYLINDRE DE GAZ PROPANE AVERTISSEMENT AVERTISSEMENT Si ces directives ne sont pas suivies avec précision, un Un incendie peut survenir si le tuyau d’alimentation en gaz incendie peut se déclarer et causer de graves blessures, fait contact avec le dessous du foyer.
  • Page 54 ENCADREMENT ET INSTALLATION DE FOYER INFORMATION SUR LE CYLINDRE DE GAZ PROPANE Recouvrements pour systèmes d’alimentation en Gaz Propane Le recouvrement du cylindre Gaz Propane doit isoler le cylindre Les recouvrements des cylindres d’alimentation en Gaz Pro- du compartiment du brûleur pour fournir : pane devront être ventilés par des ouvertures au niveau de la Une protection contre la radiation thermique;...
  • Page 55: Finitions

    ENCADREMENT ET INSTALLATION DE FOYER FINITIONS Une fois le raccordement du gaz et de l’électricité, baisser et Le foyer peut aussi être installé avec des panneaux affleurants à la façade du foyer. Voir la figure 27. Dans cette application, les fixer le brûleur (laisser deux supports au bas du foyer pour usage futur) avec les deux vis retirées à l’étape 9 sur la page deux panneaux supérieurs non combustibles (fournis) sont requis au-dessus du foyer.
  • Page 56 ENCADREMENT ET INSTALLATION DE FOYER FINITIONS Installation du verre pilé Ces morceaux peuvent être utilisés, mais pas sur le brûleur ni S’assurer que les grilles sur le brûleur sont bien installées, autour de la flamme. Voir figure 28. qu’elles couvrent entièrement les ouvertures DEL. Placer le verre On peut ajouter des gouttelettes de verre décoratif, mais elles ne pilé...
  • Page 57: Instructions D'allumage

    INSTRUCTIONS D’ALLUMAGE POUR VOTRE SÉCURITÉ, LISEZ AVANT D’ALLUMER AVERTISSEMENT Ne pas respecter à la lettre les instructions dans le présent manuel pourrait causer un incendie ou une explosion, entraînant des dommages matériels, des lésions corporelles ou la perte de vies humaines. A.
  • Page 58: Caractéristiques De La Flamme Du Brûleur Principal

    CARACTÉRISTIQUES DE LA FLAMME DU BRÛLEUR PRINCIPAL Figure 31 – Flamme correcte de gaz propane Figure 29 AVERTISSEMENT Ne JAMAIS faire fonctionner le foyer lorsque la porte contre les intempéries en option est en place. Figure 32 – Flamme correcte de gaz naturel Lors d’une opération normale à...
  • Page 59: Instructions D'opération / Apparence De La Flamme

    INSTRUCTIONS D’OPÉRATION / APPARENCE DE LA FLAMME Bouton de luminosité DEL Appuyer sur le bouton de luminosité pour activer les témoins DEL et pour tourner l’intensité DEL de haute à basse à éteinte. 1 – Allumée – Forte 2 – Moyenne 3 –...
  • Page 60: Câblage

    CÂBLAGE Étiqueter tous les fils avant de les débrancher. Les erreurs de câblage peuvent se solder en un mauvais fonctionnement dangereux. Vérifier le bon fonctionnement après toute opération d’entretien. Figure 36 – Câblage du système DEL Figure 37 – Câblage du système allumeur électronique Page 24 35305-8-0818...
  • Page 61: Entretien

    ENTRETIEN Gardez le compartiment de commande et la zone autour du brûleur NETTOYAGE PÉRIODIQUE – Veuillez vous référer au diagramme propre. de pièces pour l’emplacement des articles discutés ci-dessous. • Ne pas utiliser de nettoyant liquide pour nettoyer n’importe Toujours maintenir le voisinage du foyer dégagé et exempt de quelle pièce du foyer.
  • Page 62: Dépannage

    DÉPANNAGE SYMPTÔMES - CAUSES POSSIBLES ET CORRECTION Éteindre le foyer et le laisser refroidir avant d’entretenir. Une fois que la personne de service qualifié devrait servir et réparer le foyer. Le foyer produit des odeurs indésirables. Le brûleur n’allume pas. Le foyer brûle des vapeurs de peinture, aérosols, colles, Ne pas tenir le bouton de contrôle assez longtemps. etc. - Ventiler la zone. Cesser d’utiliser des produits causant b. L’orifice du brûleur est bouché - Nettoyer le brûleur ou des odeurs lorsque le chauffage est en marche.
  • Page 63: Liste Des Distributeurs De Pièces Principaux

    LISTE DES DISTRIBUTEURS DE PIÈCES PRINCIPAUX Pour commander des pièces sous garantie, adressez-vous au revendeur Empire local. Veuillez voir le concessionnaire au www.empirecomfort.com. Pour assurer un service sous garantie, le revendeur doit connaître votre nom, votre adresse, la date d’achat et le numéro de série du produit, ainsi qui la nature du problème.
  • Page 64: Oll48Fp12S Liste Des Pièces

    OLL48FP12S LISTE DES PIÈCES UTILISEZ EXCLUSIVEMENT DES PIÈCES DE RECHANGE D’ORIGINE. L’UTILISATION DE TOUTES AUTRES PIÈCES POUR- RAIT CAUSER DES BLESSURES OU LA MORT. QTÉ REQ QTÉ REQ RÉF. RÉF. REPÈRE DESCRIPTION REPÈRE DESCRIPTION PIÈCE PIÈCE Naturel Propane Naturel Propane...
  • Page 65: Oll48Fp12S Vue Des Pièces

    OLL48FP12S VUE DES PIÈCES 35305-8-0818 Page 29...
  • Page 66: Oll48Sp12S Liste Des Pièces

    OLL48SP12S LISTE DES PIÈCES UTILISEZ EXCLUSIVEMENT DES PIÈCES DE RECHANGE D’ORIGINE. L’UTILISATION DE TOUTES AUTRES PIÈCES POUR- RAIT CAUSER DES BLESSURES OU LA MORT. QTÉ REQ QTÉ REQ RÉF. RÉF. REPÈRE DESCRIPTION REPÈRE DESCRIPTION PIÈCE PIÈCE Naturel Propane Naturel Propane FERRURE MON- CONNECTEUR R7195...
  • Page 67: Oll48Sp12S Vue Des Pièces

    OLL48SP12S VUE DES PIÈCES 35305-8-0818 Page 31...
  • Page 68: Informations De Sécurité Importantes

    INFORMATIONS DE SÉCURITÉ IMPORTANTES • Installateur : Veuillez laisser ces instructions avec le DANGER : Indique une situation dangereuse qui, si elle n’est propriétaire pour référence ultérieure. pas évitée, causera la mort ou des blessures graves. • Cette unité est conforme à ANSI Z21.97/CSA 2.41 pour les AVERTISSEMENT: Indique une situation potentiellement dan- foyers à...
  • Page 69: Informations De Sécurité Concernant Le Gaz Propane

    INFORMATIONS DE SÉCURITÉ CONCERNANT LE GAZ PROPANE Le propane est un gaz inflammable pouvant provoquer des Le Gaz Propane peut s’accumuler en couches dans les espaces incendies et des explosions. Dans son état naturel, le gaz clos et l’odeur peut varier avec la hauteur. Puisqu’il est plus lourd propane est sans odeur et sans couleur.
  • Page 70: Maintenance Historique Du Foyer

    MAINTENANCE HISTORIQUE DU FOYER Date Nom du distributeur Nom du technicien de service Entretien effectué/notes Page 34 35305-8-0818...
  • Page 71: Garantie

    GARANTIE Empire Comfort Systems Inc. garantit que ce produit à foyer est exempt de défauts au moment de l’achat et pendant les périodes indiquées ci-dessous. Les produits à foyer doivent être installés par un technicien qualifié et doivent être entre- tenus et utilisés de façon sécuritaire, en conformité avec les instructions du mode d’emploi. Cette garantie est accordée à...
  • Page 72 Empire Comfort Systems Inc. Belleville, Illinois Pour toute question générale concernant nos produits, veuillez nous envoyer un courriel à info@empirecomfort.com. Pour toute question d’entretien ou de réparation, veuillez contacter votre revendeur. www.empirecomfort.com Page 36 35305-8-0818...

Ce manuel est également adapté pour:

Oll48fp12snOll48fp12spOll48sp12sOll48sp12snOll48sp12sp

Table des Matières