CPUFAN1~2, SYSFAN1~3: Fan Connectors
Fan connectors can be classified as PWM (Pulse Width Modulation) Mode and Voltage
Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed
with speed control signal. Voltage Mode fan connectors control fan speed by changing
voltage. Therefore, when you plug a 3-pin (Non-PWM) fan to a PWM Mode fan
connector, the fan speed will be always maintained at 100%, and that could be noisy.
Controlling the fan speed
There are two ways to manage fan speed. One is to go to BIOS > HARDWARE
MONITOR. The other is to use COMMAND CENTER application.
BIOS > HARDWARE MONITOR
Both methods offer gradient points of the fan speed that allow you to adjust fan speed
in relation to CPU temperature.
PWM Mode fan connector
CPUFAN1/ CPUFAN2
1
Ground
3
Sense
Voltage Mode fan connector
1
SYSFAN3
1
Ground
3
Sense
1
2
+12V
4
Speed Control Signal
1
SYSFAN1/ SYSFAN2
2
Voltage Control
4
NC
COMMAND CENTER
Overview of Components
21