Archos 101 G9 Guide D'utilisation page 3

STARTING UP
Charging the Battery
Before using your ARCHOS for the first time, completely charge the battery:
1
OR
The ARCHOS device will turn on and start charging. The charging indicator light is on when the battery is
2
charging. It will blink when the battery is charged.
IMPORTANT: When the battery is completely empty and you plug in your device, the charging indicator
light will turn on then start to blink. The indicator light blinking rapidly means that the device is charging
but does not yet have enough power to start. This charging when off may take some time. Once the device
has charged enough to start, it will switch on and display the ARCHOS boot logo.
Flash Model 8GB - 16GB
a - Connect the supplied USB cable to the ARCHOS and to the
supplied USB power adapter. Plug the USB power adapter into a wall
outlet.
IMPORTANT: Use only the included USB cable to charge your
device. Do not expect your device to charge properly when
connected to your computer.
b - Connect the supplied power cable to the ARCHOS and to a wall
outlet.
HDD Model 250GB
Connect the supplied power cable to the ARCHOS and to a wall outlet.
1