Entsorgung; Improper Use; Personnel Qualifications; Residual Risks - Trotec BM22 Guide Rapide

Entsorgung

Das Symbol des durchgestrichenen Mülleimers auf einem Elektro- oder
Elektronik-Altgerät besagt, dass dieses am Ende seiner Lebensdauer nicht im
Hausmüll entsorgt werden darf. Zur kostenfreien Rückgabe stehen in Ihrer
Nähe Sammelstellen für Elektro- und Elektronik-Altgeräte zur Verfügung. Die
Adressen erhalten Sie von Ihrer Stadt- bzw. Kommunalverwaltung. Sie können
sich auch auf unserer Webseite www.trotec24.com über weitere, von uns
geschaffene Rückgabemöglichkeiten informieren.
Durch die getrennte Sammlung von Elektro- und Elektronik-Altgeräten soll die
Wiederverwendung, die stoffliche Verwertung bzw. andere Formen der
Verwertung von Altgeräten ermöglicht sowie negative Folgen bei der
Entsorgung der in den Geräten möglicherweise enthaltenen gefährlichen Stoffe
auf die Umwelt und die menschliche Gesundheit vermieden werden.
Batterien und Akkus gehören nicht in den Hausmüll, sondern müssen in der
Europäischen Union – gemäß Richtlinie 2006/66/EG DES EUROPÄISCHEN
PARLAMENTS UND DES RATES vom 06. September 2006 über Batterien und
Akkumulatoren – einer fachgerechten Entsorgung zugeführt werden. Bitte
entsorgen Sie Batterien und Akkus entsprechend den geltenden gesetzlichen
Bestimmungen.
English
Safety
Read this manual carefully before starting or using the device. Always
store the manual in the immediate vicinity of the device or its site of use!
Warning
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and / or serious injury.
Save all warnings and instructions for future reference.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
• Do not use the device in potentially explosive rooms.
• Do not use the device in aggressive atmosphere.
• Do not immerse the device in water. Do not allow liquids to penetrate
into the device.
• The device may only be used in dry surroundings and must not be used
in the rain or at a relative humidity exceeding the operating conditions.
• Protect the device from permanent direct sunlight.
• Do not expose the device to strong vibrations.
• Do not remove any safety signs, stickers or labels from the device. Keep
all safety signs, stickers and labels in legible condition.
• Do not open the device.
• Observe the storage and operating conditions as given in the Technical
data chapter.
4
Intended use
Only use the device for moisture measurements of wood and building
materials within the measuring range specified in the technical data.
To use the device for its intended use, only use accessories and spare parts
which have been approved by Trotec.

Improper use

Do not use the device in potentially explosive atmospheres, for measurements
in liquids or at live parts. Trotec accepts no liability for damages resulting from
improper use. In such a case, any warranty claims will be voided. Any
unauthorised modifications, alterations or structural changes to the device are
forbidden.

Personnel qualifications

People who use this device must:
• have read and understood the operating manual, especially the Safety
chapter.

Residual risks

Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may use it as a
dangerous toy.
Warning
The device is not a toy and does not belong in the hands of
children.
Warning
Dangers can occur at the device when it is used by untrained
people in an unprofessional or improper way! Observe the
personnel qualifications!
Caution
When handling the device there is a risk of injury due to the
exposed measuring tips.
Always put on the protective cap when not in use.
Caution
Keep a sufficient distance from heat sources.
Note
Exclusively use the original measuring tips included in the scope of
delivery. Other measuring tips might bend or damage the holder at
the measuring device.
Note
Never force the measuring device into the material to be measured
or yank it out. Applying force can lead to bending or breaking of the
measuring tips or to the destruction of the housing.
Note
To prevent damages to the device, do not expose it to extreme
temperatures, extreme humidity or moisture.
Note
Do not use abrasive cleaners or solvents to clean the device.
Feuchtemessgerät BM22 DE