Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FAN ASSEMBLY
Installation of the Main Engine
1.
Align the six snap joints on the machine body of the air outlet with the six snap joint holes on the machine
engine. Push the air outlet toward the panel until it is aligned with the panel.
•
To dismantle the machine body, reverse step 1.
Base Installation
1.
Thread the power line from the main engine through the nut and base. Screw the nut in a clockwise direction to
tighten the nut to the bottom of the base. (shown in Figure 1)
•
To dismantle the base, reverse Step 1.
2.
Organize the power line and put it into the base trunking according to its flat position direction. (shown in
Figure 2)
Base
Main Engine
Figure 1
Power Line
Nut
Base
Trunking
Power Line
Figure 2
5
Publicité
Chapitres
Table des Matières
