Publicité
GNSS INTERFACE FOR RF ANTENNA - INTERFACE GNSS POUR ANTENNE RF STANDARD
INTERFAZ GNSS PARA ANTENA RF ESTÁNDAR - INTERFACE GNSS FÜR STANDARD RF-ANTENNE
INSTALLATION MANUAL — NOTICE D'INSTALLATION — INSTRUCCIONES - INSTALLATIONSANLEITUNG
4 Electrical connections - Branchements électriques - Conexiónes eléctricas - Elektrische Installation
EN : Connect the RF antenna and the GNSS interface using a coaxial cable type LMR-400 or equivalent (depending on the
antenna used, the cable length should not exceed 100 meters).
Connect the GNSS interface and the time server using an Ethernet RJ45 cable, its length should not exceed 1200 metres.
The GNSS interface is powered via this cable if the cable length does not exceed 500 metres.
Beyond this cable length, the GNSS interface must be supplied via a 24 V
observe any correct polarity.
We recommend the following type of Ethernet cable :
- Straight Ethernet cable, Shielding : U/FTP minimum
Gauge : AWG 23/24/26 : up to 1200m max, AWG 28 : up to 750m max
LED indicators provide information on the status of the product:
- The green LED on the RJ45 connector indicates the status of the power supply via the Ethernet cable:
> LED on : valid power supply,
> LED off : no power supply.
- The status of the red LED indicates the status of the synchronisation:
> Flashing rapildly when the antenna is not yet synchronised (searching for signal),
> Flashes once per second when the antenna is synchronised,
> Extinguished if there is no power.
- The status of the green LED close to the 24V power connector indicates the status of this power supply:
> LED on : valid 24V power supply,
> LED off : no power supply.
RJ45 connector: link with
time server Netsilon 9 / 11
Green LED: power
supply via Ethernet
type cable status
Red LED :
synchronisation status
Green LED : 24V
power supply status
www.bodet-time.com
REF.: 907 976
+/-2 V, 500 mA power supply. You do not need to
Clip for DIN
rail mounting
24V power supply connector
BODET Time & Sport
1, rue du Général de Gaulle
49340 TREMENTINES I France
Tél. support France: 02 41 71 72 99
Tel. support Export: +33 241 71 72 33
N type connector:
RF antenna coax cable
4
Publicité
