Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
M S-7345 M ainboard
13
Hardware Overclock FSB Jumpers: JB1, JB2 (optional)
You can overclock the FSB to increase the processor frequency by changing the jumpers
JB1 and JB2. Follow the instructions below to set the FSB.
1
3
200 MHz
Important
Make sure that you power off the system before changing the jumpers
14
CD-In Connector
This connector is provided for external audio input.
15
Chassis Intrusion Connector
This connector connects to the chassis intrusion switch cable. If the chassis is opened,
the chassis intrusion mechanism will be activated. The system will record this status and
show a warning message on the screen. To clear the warning, you must enter the BIOS
utility and clear the record.
En-12
1
JB1 JB2
1
1
3
3
266 MHz
333 MHz
GND R
L
CINTRU
1
GND
2
Publicité
Table des Matières
