ALPATEC TF 360 ESI Mode D'emploi page 7

All manuals and user guides at all-guides.com
notice_TF 360_ESI 16/11/06
Plug the appliance.
A – On/off : press this button to start or stop the fan. The operation indicator lights on or off.
B - + or - : press this button to adjust speed level : 8 levels.
C – Mode : press this button to select running mode : normal
NORMAL: fan speed is constant
NATURAL: fan speed goes from one step to another
SLEEP: same as natural but more and more slowly
D – Oscillation : press this button to start, adjust or stop oscillation. Press one time to start and select
90°, press again to select 180°, press again to select 360° and press again to stop the
oscillation.
E – Timer : press this button to set the timer level : from 1 h to 12h. One pressure corresponds to one hour.
F – Ion : Press this button to activate or stop the ionization function.
CONTROL PANEL
B
E C
- Ensure the appliance is unplug before cleaning.
- For the externals parts, use a soft tissue or cloth to clean.
- In case dirt or grime does not come off easily, use soapy water.
- Use vacuum cleaner to clean the grid or with a brush.
- Never use solvent or abrasive solution.
- Never dismantle the appliance.
15:36 Page 7
USING OF APPLIANCE
USING OF APPLIANCE
F B
D A
MAINTENANCE
MAINTENANCE
7
natural sleep
REMOTE CONTROL
E C D
A
B
F
B