Page 1
T81153v2.2 14104 Mar 05 Designer and Vandal-Resistant Readers Installation Guide Designer und Vandal-Resistant Lesers Installationsanleitung Designer et Vandal-Resistant Lecteurs Guide d'installation Designer y Vandal-Resistant Lectores Guía de instalación Designer och Vandal-Resistant Läsare Installationsanvisningar Designer en Vandal-Resistant Lezers Installatiehandleiding...
Page 2
In compliance with FCC requirement 15.27 no special accessories are required in order to comply with part 15 of the FCC regulations. Changes or modifications not expressly approved by Stanley Security Solutions could void the user's authority to operate the equipment.
Page 3
/ Val av utdataformat / Selectie van uitvoerformaat Connections/Anschlüsse/ No. of flashes/ Zahl der Blinkvorgänge/ Verbindingen/Conexiones/ Nb. de clignotements/ Núm. de Anslutningar/ Connexions destellos/Aantal flitsen/ Antal blinkningar Stanley (default/vorgabe/ standaard/por defecto) Wiegand 26-bit Wiegand 34-bit Magstripe/gnetstreifen/ magnetremsa Barcode T81153v2.2...
Page 4
5. The Metal Oxide Varistor (MOV) should be fitted across the power terminals of the lock. 6. After installation of a Designer Reader, fill the connector well with silicone to seal it. Stanley recommend a high-quality sealant like Dow Corning Type 732.
Page 5
4. El varistor de metal-óxido se debería montar a través de los terminales de potencia de la cerradura. 5. Tras la instalación de un Designer Lector, rellene bien el conector con silicona para sellarlo. Stanley recomiendan un sellante de alta calidad como el Dow Corning tipo 732.