Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
IB519014EN
Installation Instructions - SkyRidge Surface Mount Bracket
Instructions d'installation - Support pour montage en surface
SkyRidge
Instrucciones de instalación – Soporte de montaje de superficie
SkyRidge
WARNING
Risk of fire, electrical shock, cuts and or other casualty
hazards. This product must be installed in accordance
with the applicable installation code by a qualified
electrician or a person familiar with the construction
and operation of the product and the hazards involved.
Eaton assumes no responsibility for claims brought
about by improper or careless installation or handling
of this product.
WARNING
Risk of Fire and Electric Shock. If not qualified, consult
an electrician.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on delivery
receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15
days of delivery. All damaged material, complete with original packing must be retained.
INSTALLATION
1.
Remove the driver compartment from the driver mount
bracket in standard SkyRidge fixture (Figure 1).
CAUTION
Edges May Cut. Handle with care.
CAUTION
Risk of burn. Disconnect power and allow fixture to cool
before changing bulb or handling fixture.
NOTICE: Green ground screw provided in proper location.
Do not relocate.
NOTICE: Minimum 90° supply conductors.
NOTE: Specifications and dimensions subject to change
without notice.
Figure 1.
Brand Logo
reversed out of
black
INS #
INS #
Driver Compartment
Publicité
Sommaire des Matières pour Eaton Metalux SkyRidge
- Page 1 Risk of burn. Disconnect power and allow fixture to cool Eaton assumes no responsibility for claims brought before changing bulb or handling fixture. about by improper or careless installation or handling NOTICE: Green ground screw provided in proper location.
- Page 2 Mount the surface mount over driver mount bracket using three screws (Figure 3). Place the driver compartment and screw into place (Figure 4). Figure 3. Driver Compartment Surface Mount Bracket Driver Mount Bracket Figure 2. Figure 4. EATON IB519014EN Installation Instructions...
-
Page 3: Important
électricien qualifié ou une personne familière MISE EN GARDE avec la construction et le fonctionnement du produit ainsi que les risques inhérents. Eaton n'assume aucune Risque de brûlures. Mettez l’alimentation électrique hors tension responsabilité quant aux réclamations dues à une et laissez refroidir le luminaire avant de le manipuler ou de changer l'ampoule. - Page 4 Compartiment les trois (3) vis (Figure 3). du circuit de Insérez le compartiment du circuit de sortie et vissez sortie fermement en place (Figure 4). Figure 3. Figure 4. EATON IB519014EN Instructions d’installation...
- Page 5 Riesgo de quemadura. Desconecte la energía y deje enfriar la instalación aplicable. Eaton no se responsabiliza por luminaria antes de manipularla o cambiar la bombilla. los reclamos presentados respecto de la instalación AVISO: El tornillo de conexión a tierra verde ya está...
- Page 6 Monte el montaje de superficie sobre el soporte de montaje del controlador usando tres tornillos (Figura 3). Compartimento Coloque el compartimento del controlador y ajuste los del controlador tornillos (Figura 4). Figura 3. Figura 4. EATON IB519014EN Instrucciones de instalación...
- Page 8 Warranties and Limitation of Liability Please refer to www.eaton.com/LightingWarrantyTerms for our terms and conditions. Garanties et limitation de responsabilité Veuillez consulter le site www.eaton.com/LightingWarrantyTerms pour obtenir les conditions générales. Garantías y Limitación de Responsabilidad Visite www.eaton.com/LightingWarrantyTerms para conocer nuestros términos y condiciones.