Home Decorators Collection Ellia HDC36TDV Guide D'utilisation Et D'entretien page 5

Assembly (continued)
3
Backsplash Installation
To mount the backsplash (C) to the wall, apply a thin bead of silicone compound (not included) to the unpolished back side and bottom of
□
the backsplash (C). Position backsplash (C) as shown onto vanity top (A) and against the wall. Clean any excess silicone compound before
allowing to dry.
4
Vanity Drawer Removal
□ Removing the Drawer:
1. Unload the contents from the drawer.
2. Slide out the drawer as far as it will go.
3. Press the lever down on the right-hand track and lift the lever up on the
left track to release the drawer. Pull the drawer out the rest of the way.
□ Replacing the Drawer:
1. Align the drawer guides with the receiving glides.
2. Hold the receiving glides firmly and insert the drawer guide.
NOTE: It is normal for the drawer to close tightly the first time after it has
been removed.
3. Push the drawer in completely.
C
5
Silicone
A
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.