Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ALIGNMENT AND ADJUSTMENTS
To avoid risk of electrical shock, personal injury or death; disconnect power to washer
before servicing, unless testing requires power.
Board Input Test Mode
Service Mode
Definition of Board Input Test Mode:
- Board Input Test Mode is to displays a specified Input after a key press.
How to Enter:
Model : WF455AR*
- To enter the Fast Time Down Test Mode, press the Temp key During Service Mode.
Model : WF457AR*
- Press "TEST" On the Service Mode.
Board Input Test Mode:
- If the product enters Board Input Test Mode, 'in' is displayed.
- The information that is displayed in the Board Input Test is as follows.
1. The Water Temperature in Celsius.
2. The Water Temperature in Fahrenheit.
3. The door status (OP if open, CL if closed).
4. The Door Lock Switch status (UL if unlocked, LO if locked).
5. The Water Level Pulse
- You can change each information using the Cycle Selector(WF455) and arrow(WF457) button.
(Techsheet)WF457AR-03152A-02_EN.indd 12
WARNING
WF455AR* : Extra Rinse
WF457AR* : TEST Key
12
Board Input Test
2012-12-13 11:22:48
Publicité
Table des Matières
