Setting Up The General Options; Setting Up The Support Options; Reference; Troubleshooting - Samsung DVD-C500 Mode D'emploi

Setting Up the General Options

1. With the unit in Stop mode, press the MENU button. Press the
press the ENTER button.
2. Press the / buttons to select GENERAL, then press the
3. Press the / buttons to select the desired item, then press the

Setting Up the Support Options

Support option enable you to check your DVD player information such as the model code, Software
Version, The serial and version numbers can be found on the back side of your DVD-Player.
1. With the unit in Stop mode, press the MENU button. Press the
press the ENTER button.
2. Press the / buttons to select SUPPORT, then press the
3. Select PRODUCT INFORMATION, then press the
/ buttons to select SETTINGS, then
or ENTER button.
or ENTER button.
/ buttons to select SETTINGS, then
or ENTER button.
or ENTER button.

Reference

Troubleshooting

Before requesting service (troubleshooting), please check the following.
Problem
• 5.1 channel sound is reproduced only
1) The DVD player is connected with the proper Amplifi er
5.1 channel sound is not
2) The disc is recorded with 5.1 channel sound.
being reproduced.
• Check whether the disc being played has the "5.1 ch" mark on the outside.
(DVD-C550K)
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set Bitstream?
• Press the ■/ || button (in front panel) for more than 5 seconds under no
The screen is blocked.
disc inside. All setting will revert to factory settings.
• Press the ■/ || button (in front panel) for more than 5 seconds under no
Forgot password. disc inside. All setings including the password will revert to the factory
settings. Don't use this unless absolutely necessary.
• Check the Video output is HDMI enabled.
No HDMI output • Check the connection between the
• See if the TV supports this 480p/ 576p/720p/1080i/1080p DVD player.
Abnormal HDMI output • If snow noise appears on the screen, it means that TV does not
screen. support HDCP (High-bandwidth Digital Content Protection).
• Check your TV system setup correctly.
• The screen Jitter phenomenon may occur when frame rate is converted from 50Hz to
HDMI output Jitter
60 Hz for 720p/1080i/ 1080p HDMI (High Defi nition Multimedia Interface) Output.
• Please refer to the user's manual of your TV.
Action
when the following conditions are met. :
TV and the HDMI jack of DVD player.
13