Transporting Tool; Maintenance - RIDGID AC9940 Mode D'emploi

9. The workstand can be moved by pull-
ing or pushing. To keep the workstand
from tipping over, pulling the unit is the
preferred method when moving over a
door threshold or crack.
NOTE: If desired, with the help of a sec-
ond person, the foot of the stand may also
be used as a carry handle as shown.
If a sliding compound miter saw is
mounted on the workstand, it may be nec-
essary to slide the power head/blade
assembly forward and lock in place when
going through doorways or other narrow
openings.

Transporting Tool

When hauling the workstand in a vehicle,
securely tie it down to prevent movement
and possible damage.

Maintenance

Periodically clean the sliding roller tracks as shown below.
Also clean and lubricate the locking handle.
Keep Area
Clean
Keep Area
Clean and
Lubricated
13