Emptying The Tank; Drain The Tank - Mitchell & Cooper crustastun CS01 Manuel D'installation Et D'utilisation

EMPTYING THE TANK

EXTEND THE WASTE HOSE
01
Pull out the waste water hose from the
recess on the underside of the unit.

DRAIN THE TANK

02
Place the end of the waste water hose in a
suitable container and turn the valve into
the OPEN position so that the water drains
away. Close the valve and empty the waste
water container. Repeat until the tank is
empty. Flush with clean water at the end of
service to ensure clean tank.
IMPORTANT
CRUSTASTUN NEEDS TO BE DRAINED AND CLEANED DAILY.
DO NOT LEAVE SALT WATER IN THE TANK OVERNIGHT.
USE A NON-ABRASIVE CLOTH AND FRESH WATER TO WIPE DOWN AND REMOVE SALT RESIDUES.
DO NOT LEAVE THE SPONGE ATTACHED TO THE LID OVERNIGHT OR WHEN THE CRUSTASTUN IS
NOT USED FOR EXTENSIVE PERIODS. DO NOT LET THE SPONGE DRY WHEN FITTED TO THE LID
CLOSED
CONTAINER FOR
OPEN WASTE WATER
11
POWER
1 2 3 4 5 6 7 8