Safety Precautions; Handling Cautions; Accessories - Panasonic TY-42TM6G Mode D'emploi

Safety Precautions

WARNING
•
Never attempt to disassemble or modify this product.
To avoid fire, shock, or failure.
•
If you sense smoke, an odd odor, or unusual noises while in operation, immediately turn the display off.
Switch off the plasma display and unplug it from the supply outlet.
To avoid fire or shock, do not leave the display turned on.
•
To avoid shock or other problems, do not leave the display plugged into the supply outlet.
•
Please contact our designated service department for installation or change of this product.
To Service personnel:
Before removing or installing the Terminal Board, be sure to turn the display off and unplug it from
the supply outlet.

Handling Cautions

• Do not touch the connector contacts.
To avoid electrostatic damage to internal parts, touch a large metallic object such as a steel cabinet to
discharge yourself before handling this product.
• Be sure to use the supplied cable or specified parts for interconnection.
To avoid malfunction or failure, do not use parts other than those recommended.

Accessories

Check to make sure that the following accessories are included in the Terminal board package:
Terminal function label (1 sheet)
TBMU307
PET
(Affix this label to the rear panel of the display.)
Slot Nos. of the PDP unit that are compatible with terminal board attachments.
37inch
42inch 50inch
6
IN OUT
PC1 SLOT
SERIAL OUT
Slot1, Slot2
Slot1, Slot2 ( Slot3 is not compatible )
(be sure to observe)
Terminal board replacement
Instructions
1 2 3