Important Safety Instructions - RecWaterTec SolarClear Consignes D'utilisation

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS
!
WARNING:
! WARNING:
!
WARNING:
WARNING:
!
WARNING:
!
!
CAUTION:
PRELIMINARY ASSEMBLY
Anode
Unpack all contents of package – be sure to look inside the insert for parts. Read all instructions before assembling:
1. Inspect the solar panel for any visual damage or imperfections which may have occurred during shipping. If any discrepancies are
noticed, contact your dealer or SolarClear customer service.
2. Lay the unit face down on a smooth surface.
3. With one hand, hold the spring electrode down in a compressed condition to avoid interference.
4. Thread either end of the mineral electrode clockwise onto the silver metal screw stud inside the coil electrode at the center of the unit.
5. Tighten snugly by hand, about a quarter turn, after contact with the black rubber seal at the base.
6. Lay the end-cap/spacer onto end of mineral electrode.
7. Place screen cage over electrodes and line up centered holes with the threaded bore in the mineral electrode end.
8. Thread the black thumbscrew clockwise into the electrode and tighten snugly. Do not over tighten as the plastic thumbscrew may strip
or break.
Unit with Spring
SolarClear Manual Version 1.1
To reduce the risk of injury, do not permit children to use this product unless they are
closely supervised at all times
The sole purpose of this product is for use as a pool water purifier/ionizer as described in this
manual; any modification or other use will void the warranty
Do not use if unit is damaged in any way.
Unit must be floating in pool water when exposed to sunlight or warranty is void.
This unit is not compatible with/in pools where biguanide sanitizer(s) is/are in use.
If SolarClear is not working as it should or has been dropped or damaged in any way,
contact RecWaterTec, LLC customer service before using at info@recwatertec.com
SAVE THESE INSTRUCTIONS
Screen Nylon Screw
Unit with Spring and Anode
Compliments of www.poolsandstuff.com
2
Brush
Unit Assembled (upside-down)