Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Plug in the mains plug.
1
Place the container
on the motor unit
2
C
The program buttons light red.
Standby mode.
3
Set the rotary knob
F
to the desired speed level (
Processing starts.
- If you set the rotary knob to position
cessing, processing stops.
- You can change the speed level at any time.
or
Press a red-lit program button.
4
- Once the program has ended, processing stops au-
tomatically.
- You can cancel the running program at any time by
pressing the red-lit program button.
Processing ingredients
Please see the enclosed recipe book for information, ex-
amples and tips on preparing food, working with the Mix-
anto and on using the accessories.
Taking the appliance out of service
•
Stop processing by turning the rotary knob for the speed
setting
to
or
F
0
•
Interrupt the running program by pressing the red-lit
program button.
•
Plug out the mains plug.
Cleaning
WARNING Risk of electric shock!
•
Unplug the appliance from the mains before cleaning.
CAUTION Sharp parts can cause injury!
•
The cutting surfaces of the stainless steel blades are very
sharp! Handle the stainless steel blades with care.
Dishwasher can cause damage!
NOTE
•
The appliance components are not dishwasher-safe.
Only clean the components using lukewarm water and
washing-up liquid.
•
Use the
program for pre-cleaning (
PRE CLEAN
see page 9).
description
•
Do not use any corrosive or abrasive cleaning agents.
•
Allow the appliance to cool down before cleaning it.
•
Never immerse the motor unit in water and never hold
it under running water.
•
Only ever clean the motor unit and the mount for the
container with a damp cloth.
•
Disassemble all components after every use and thor-
oughly clean all parts that have come into contact with
food.
Subject to technical changes without notice; no responsibility is accepted for the accuracy of this information.
Some foods such as carrots, tomatoes and also curry
Tip:
.
can cause discolouration of the plastic parts; this is normal.
H
You can reduce this discolouration by wiping the plastic
parts with a kitchen towel and a little cooking oil. Then
0 - 5
).
wipe this away, first with warm water and then with cold
water and a little washing-up liquid.
0
during pro-
Program description
Program
SLOW
START
SMOOTHIE
CRUSH
CLEAN
Further information on the programs is provided in the
enclosed recipe book.
Storage
Store the appliance in its original packaging, in a dry, dust-
free and cool place that is out of reach of children.
Notes on disposal
work for the collection and recycling of old electrical de-
vices. You can obtain the latest disposal information from
the specialist trade or your local authority.
Technical specifications
Program
Parameter
Operating voltage
Power rating
Max. speed
Speed levels
Max. fill quantity
Fill level marking
Function
Slow start, speed is continuously
increased to the speed set with the
rotary knob.
This is recommended to ensure that
the ingredients are mixed at a gradu-
ally increasing speed from the very
start of processing.
To make smoothies. Starts at a low
speed and increases the speed when
the ingredients thicken.
ICE
To crush ice cubes or for hard ingredi-
ents that need short bursts of speed.
To pre-clean the container (see sec-
PRE
tion
Cleaning
This appliance is labelled in accordance with
European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment (WEEE).
The directive stipulates the EU-wide frame-
Value
220 - 240 V AC, 50/60 Hz
2,000 W
20,000 rpm
5 (4,000 - 15,000 rpm)
PULSE (20,000 rpm)
2.0 litre
Litres
Cups (approx. 235 ml)
on page 9).
9
Publicité
Table des Matières
