Sony Ericsson LiveView Guide De L'utilisateur page 12

3 Make sure the LiveView™ device is turned off. Press and
hold down
mode.
4 All Bluetooth™ devices within range of your phone will be
listed. Tap LiveView™ in the list that appears.
5 When asked to add LiveView™, follow the instructions
that appear.
6 If you are asked to enter a passcode, enter 0000.
Once you have paired your phone with the LiveView™
device, your phone will remember this pairing. You do
not need to re-enter the passcode the next time you
connect to a paired LiveView™ device.
If pairing fails, the LiveView™ device switches off and
you need to restart and enter pairing mode again.
To install the LiveView™ application
1 Once your phone and the LiveView™ device are paired,
a popup window on your phone asks if you want to install
the preferred application for the accessory. Tap Yes. You
are taken to the Android Market™ application in the
phone.
2 When details of the LiveView™ application appear, tap
Install.
3 After the LiveView™ application has been installed in
your phone, press any key on the LiveView™ device to
start the application.
4 To connect LiveView™ with your phone, go to your
phone's main menu, then find and tap LiveView™
application > Manage LiveView™.
5 Find and tap LiveView™ .
6 To disconnect, tap LiveView™ again.
12
until the LiveView™ device enters pairing
September 13, 2010 15:07:13