Normal Mode - LARQ Bottle PureVis Mode D'emploi

You're just a few steps away from cleaner
water. Get excited.
Step 1
Fill with clear water* up to the indicator line shown on the bottle illustration.
Step 2
Screw on cap and press the
twice for Adventure Mode. (Do not interrupt the PureVis™ cycle by removing
the cap or pressing the

Normal Mode

Breathing sky blue light.
Adventure Mode
Pulsing blue light.
Safety Mode (Light Sensor)
Steady orange light will turn on when activated outside the bottle.
Safety Mode (Temperature)
Pulsing orange light will flash when liquid is too hot inside the bottle.
Step 3
While you wait, give the bottle a gentle shake or do your best water dance
to spread the PureVis™ light evenly. And voila! Enjoy better water from a
cleaner bottle. #DrinkBrilliantly
*Water should be clear with no sediments. Filter murky water before using PureVis™
with the LARQ Bottle.
button for PureVis™ - once for Normal Mode,
button!)