Waring Commercial WDM120TX Mode D'emploi page 5

3. Speed Button:
Every press will increase the speed from Lo to Hi. This is
circular, so 3 presses gets you back to Lo.
4. Pulse Button:
Press and hold Pulse Button and the mixer runs
at the set speed until button is released.
TIMER RANGE
1. Timer range 0:01 to 9:59
NOTE: To deactivate timer, tap
the timer, tap
a unit with more than one timer, the timers will need to be set
individually.
1. Manual Timer Programming
– Ensure timer is activated and in the ON position (R0:00).
– Press and hold the
SET mode (display will blink during SET mode), S0:00.
– Use
– Wait 5 to 6 seconds and time will be set.
– To reset time, press and hold
simultaneously for 3 seconds.
2. Assisted Timer Programming
– Ensure timer is activated and in the ON position (R0:00).
– Mount the cup and actuate. Timer will begin to count up.
– When your mix has reached its desired consistency,
remove the cup.
– Press and hold the
OR replace the cup within 10 seconds to continue the
count.
NOTE: If cup is removed during countdown or count-up, the timer
will pause and blink for 10 seconds. Replace the cup within the 10
seconds to continue, or timer will return to set time.
or once. Timer will read (R0:00). If you have
and buttons to scroll until you reach desired time.
3 times rapidly. To activate
button for 3 seconds to enter the
and
button for 3 seconds to set the time
5
buttons