Planetary Mixing System; Before First Use; Selecting Attachment Types; Assembling And Disassembling The Appliance - Sencor STM 3620WH-NAA1 Manuel D'utilisation

STM 3620WH-NAA1 / STM 3621GR-NAA1 / STM 3622BL-NAA1 / STM 3623OR-NAA1 / STM 3624RD-NAA1
STM 3625VT-NAA1 / STM 3626YL-NAA1 / STM 3627TQ-NAA1 / STM 3628RS-NAA1 / STM 362XXX-NAA1

PLANETARY MIXING SYSTEM

• The planetary mixing system is based on the principle of dual rotation of the attachment . The
attachment rotates anticlockwise along the inner perimeter of the bowl while rotating around
its own axis in the opposite direction . This ensures that ingredients inside the bowl are processed
thoroughly and evenly .

BEFORE FIRST USE

1 . Take the appliance and its accessories out of the packaging materials .
2 . Thoroughly wash all parts that are intended to come into contact with food (dough hook A1,
whisk A2, beater A3, the stainless steel mixing bowl A4 and pouring shield A6 using warm
water and a neutral kitchen detergent . Then rinse them with clean water and dry thoroughly with
a fine wiping cloth .

SELECTING ATTACHMENT TYPES

ATTACHMENT TYPE
Dough hook A1
Beater A3
Whisk A2

ASSEMBLING AND DISASSEMBLING THE APPLIANCE

• Before you start assembling or disassembling the food mixer, check that it is turned off and
disconnected from the el . power socket .
1. Inserting the mixing bowl
1 .1 Place the food mixer on an even, dry surface, for example on a kitchen workbench .
1 .2 Release the arm A8 by pressing the PUSH button A9 and tilt it upwards . The arm A8 is locked in
the open position when the PUSH button A9 slides out together with an audible click .
1 .3 Place the stainless steel bowl A4 into the hole in the base unit A5 and secure it in place by turning
it clockwise . When the bowl A4 is properly attached, it is not possible to lift it off the base unit
A5 .
2. Attaching an attachment (dough hook, beater or whisk)
2 .1 If you decide to use the pouring shield A6, then it is necessary to attach it prior to mounting an
attachment . Carefully seat the pouring shield A6 on to the tilt-out arm and secure it in the locked
position by turning it anticlockwise .
2 .2 When attaching an attachment, the arm A8 must be secured in the open position, see point 1 .2
in chapter Inserting the mixing bowl . Attach one of the attachments to the T-shaped shaft of
the mixing head A7 so that the shaft fits into the hole on the attachment . Push the attachment
towards the mixing head A7 turn it anticlockwise to secure it to the shaft .
2 .3 With one hand, hold the attachment and gently pull it downwards . If it is properly secured to the
shaft, it will not come off .
2015
Table Mixer
PURPOSE OF USE
It is used for kneading and preparing heavy and thick doughs containing
yeast, e .g . bread dough .
It is used for mixing medium heavy and lighter doughs not containing yeast,
for mixing sauces, creams, fillings, etc .
It is used for whisking whole eggs or egg whites, whipped cream, light
doughs, foamy creams, etc . Do not use it for mixing heavy and thick doughs .
EN-5
07/2015