Operating Instructions; Technical Data - Leister COUPON CUTTER Notice D'utilisation

Operating Instructions

GB
Please read operating instructions carefully before use
and keep for future reference.
COUPON CUTTER
Weld test cutting tool
Application
• Cutting test material for peel, tension shear and tensile tests of plastic sealing membranes, geotextiles
and plastic sheets.

Technical data

Test piece dimensions L × B
Material thickness up to max.
Weight
Mass L × W × H
Subject to technical changes
6
Caution
Place the tool on a safe and stable work surface.
Tool must be operated under supervision.
Improper handling and operation of this tool can be dangerous! Tool must only be
used by trained experts or under their supervision. Use by children is completely
forbidden.
The weld test cutting tool COUPON CUTTER should only be used for cutting test
materials made of plastic.
No other objects or materials should be pushed into the opening or cut. Only cut
clean and dry test material.
Keep the tool clean. The blade, jacking beam and cutter bar must always be clean
and free from residues.
Work with protective gloves.
Risk of injury! When touching the cutting blade.
Do not put your fingers or any other part of your body in the openings between
the blade and jacking beam.
Wear nonslip safety shoes and ensure that you are standing in a stable position.
Protect COUPON CUTTER from soiling and moisture.
mm
mm
kg
mm
(Translation of the original operating instructions)
150 × 20
6
19
712 × 254 × 203