4.4.3 Warning m essage
If a disabled camera is requested, the display will show a message warning the operator that the request is not
authorised:
All cameras in the 1-1000 set are accepted, while those from
1001 to 3000 are not. Select the 1-1000 set with the keys
and
and press
The icons on the right of the display show that none of the
cameras in the sets from 1 to 3000 are now available on request.
Select the 1-1000 set with the keys
to pass to a more precise definition level.
The sets shown on the display are now of 100 cameras each.
None of the cameras in the sets are accepted.
Select the 1-100 set with the keys
to pass to a more precise definition level.
Select the 1-10 set and press
set from 1 to 10.
Then press
to define acceptance at the individual camera
level.
Since all cameras from 1 to 10 are now accepted, it is necessary
to run through the list to disable cameras 8,9,10, so as to satisfy
the requirements of the example. Scroll the with the keys
and
u ntil camera 8 is reached.
Press
to disable camera 8. Continue in the same way to
disable cameras 9 and 10.
After completing modification, pressing
previous menu and then again on up to the main menu.
The icon of the 1-10 set has now been changed to
only some of the cameras in the group are now accepted.
Page 13
to completely disable all cameras.
and
and
to accept all cameras in the
will return to the
MNECKSKBK_0350
a nd press
a nd press
to show that