Armor All 1600 Serie Instructions De Montage page 5

● Do not operate the product when
fatigued or under the influence of
alcohol or drugs.
● Keep operating area clear of all
persons.
● This machine should not be used by
children or untrained personal.
● This machine is not to be used in the
rain.
● Turn off power when not in use.
● Do not overreach or stand on
unstable support. Keep good footing
and balance at all times.
● Follow the maintenance instructions
specified in the manual.
● This product is provided with a
Ground Fault Circuit Interrupter built
into the power cord plug. If
replacement of the plug or cord is
needed, use only identical
replacement parts.
Risk of Injection or Injury – Do Not
Direct Discharge Stream At
Persons or Animals.
● High-pressure jets can be dangerous
if misused. The jet must not be
directed at persons, animals,
electrical devices, or the unit itself.
● Wear safety goggles and ear
protection.
● Do not direct the spray against
yourself or anyone else in order to
clean clothes and footwear.
● When the water pressure is high
enough, the safety valve will open
automatically.
● Never jam the gun trigger into the
open position.
Risk Of Fire/Explosion – Do not
spray flammable liquids.
● Do not use acids, alkaline, solvents,
or any flammable material in this
product. These products can cause
physical injuries to the operator and
irreversible damage to the machine.
Risk of Electrocution
● Inspect cord before using - Do not
use if cord is damaged.
● Keep all connections dry and off the
ground.
● Do not touch plug with wet hands.
● Do not use extension cord with this
product.
● Connect to individual branch circuit
only.
● This cleaner is designed to operate
on an 120/1/60 15 amp circuit. Do
not operate on other voltage.
● Keep the power cord away from heat
sources and sharp edges to avoid
damage.
Risk of Eye Injury
● Spray can splash back or propel
objects. Always wear properly rated
eye protection such as goggles or
English 5