Getting Started - Mackie EM-91CU Manuel Du Propriétaire

GETTING STARTED

1. Read and understand the Important
Safety Instructions on page 4.
2. Connect the USB-B side of the included
1 USB cable to the microphone and the
USB-A side to the computer's USB port.
NOTE: Do not use a USB hub, keyboard's
USB port, etc. Plug directly into an open
USB port on the computer.
1. USB-B Port Connect
3. Computer setup instructions
the USB-B side of
[plug-and-play, no drivers required!]:
the included USB cable
Mac: System Preferences > Sound >
to the microphone and
Input (and Output) > USB Microphone
the USB-A side to the
PC: Control Panel > Hardware and Sound
computer's USB port.
> Sound > Playback (and Recording) >
USB Microphone (make default).
Make sure the input and output levels
of the computer are un-muted and up.
4. Open up your favorite DAW and start
a new session.
5. While most DAWs work (relatively)
the same, the path to recording may
be different. As such, refer to your DAW's
manual on how to open new sessions,
create tracks, select the USB microphone,
arm tracks and the best part... recording!
Have fun!
Technical Specifications EM-91CU
Element Black Electret Condenser
Polar Pattern Uni-directional
Frequency Response 20 Hz – 17 kHz
Sensitivity
–34 dB ±2 dB (0 dB = 1 V/Pa @ 1 kHz)
Load Impedance
≥1000 Ω
Output Impedance 100 Ω ±30% (@ 1 kHz)
Max SPL 132 dB (@1 kHz ≤ 1% THD)
Equivalent Noise Level 16 dB A
Signal-to-Noise Ratio
78 dB
Sample Rate 16-Bit / 48 kHz
6.3" × 1.7"
Size (H × W )
160 × 44 mm
Weight
0.46 lb • 0.21 kg
All specifications subject to change
NEED HELP WITH THE MICROPHONE?
• Visit www.mackie.com and click Support to find:
FAQs, manuals, and addendums.
• Telephone 1-800-898-3211 to speak with one of our splendid
technical support chaps (Monday through Friday, normal
business hours, Pacific Time).