Humeau SF40A Manuel D'instructions page 15

EN-12
Applications
Press briefly
Statistics Application
Start "Statistics
application"
(LED on)
Important notes
Unit change during the application is not permitted.
Maximum 999 samples.
Sample weight must be in the range of 70% - 130% of the current average
1)
value.
2) Minimum sample weights should be larger than 1d.
During sample change, the scale reading needs to be changed by more
3)
than 100d, otherwise the printer will not register the sample change.
4) Statistics applications include: Number of samples, average value,
standard deviation, min, max, min-max differential and total weight.
1)
Add a new sample
and press « ».
If needed print
subtotal
press « »
Print and end
"Statistic application"
(LED off).
Press and hold
Totaling Application
SF40A Printer
2,3,4)
Start "Totaling
application"
(LED on)
Add a new sample
and press «
If needed print
subtotal
press « »
Print and end
"Totaling application"
(LED off).
».