Getting Started; Unpacking; Power Source; Headphone Jack Operation - Crosley KEEPSAKE CR6249A Manuel D'utilisation

Masquer les pouces Voir aussi pour KEEPSAKE CR6249A:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Unpacking

1 Remove packing materials form unit.
Note: Save all packing materials.
2 Remove plastic bag covering unit.
3 Remove AC ADAPTER(17)form packing.
4 Remove tie from AC ADAPTER(17).
5 Open lid and remove styrofoam shipping
material from TURNTABLE(10).
6 Remove black tie-wrap form under the
TONE ARM (1).
7 Remove white protective needle cover by
gently pulling towards the front of the unit.
8 Turn the TURNTABLE SUSPENSION
SCREW clockwise until it is all the way
down. Do not force or over tighten it . This
allows the turntable to float on its shock
absorbers.
9 Release tone arm HOLD DOWN CLIP (5) by
gently pushing to the right. This will unlock
TONE ARM (1) form its arm rest. Re-lock the
HOLD DOWN CLIP (5) when moving the
unit to another location.

Getting Started

1 Unit the wire on the AC ADAPTER (17).
2 plug the AC ADAPTER (17) into appropriate
3 Plug the small end of the adapter into the
1 Connect headphone to the Headphone Jack
2 Adjust volume to the desired listening level.
NOTE: When using headphone, the sound from
the unit speakers will be cut off.
NOTE: Headphone not included with unit.

Power Source

wall outlet.
ADAPTER JACK (13) on the back of the
unit.

Headphone Jack Operation

(6).
Headphone Jack

Publicité

Chapitres

Table des Matières
loading

Table des Matières