Victron energy 7000W Manuel page 3

1. Important safety instructions
Warning!
Before installing or using this product, please read and save the safety
instructions below.
1.1 General safety precautions
1.1.1 Do not expose the isolation transformer to water, mist, snow,
spray, or dust.
1.1.2 Do not use the product where there is a risk of gas or dust
explosions.
This product is not ignition protected.
1.1.3 Use the product in accordance with specifications as stated in
paragraph 4.
1.1.4 Do not open the enclosure if the product is still connected to a
source of electrical power.
1.2 Safety: Installation
1.2.1 Connections and safety features must be according to the locally
applicable regulations.
1.2.2 This is a Safety Class 1 product (supplied with a protective
grounding terminal).
Uninterruptible protective grounding must be provided.
1.2.3 Use electric cables of the appropriate size.
1.2.4 Install the isolation transformer in a well ventilated area.
1.2.5 Keep a clear space of 10 cm around the product for ventilation.
1.2.6 For safety purposes, the product should be installed in a heat-
resistant environment.
Avoid the presence of e.g. chemicals, synthetic components, curtains or other
textiles in the immediate vicinity of the product.
1