SPECIFIC SAFETY INSTRUCTIONS FOR WET TILE/STONE SAW STAND
BE SURE to read and understand all
instructions in this manual before using
this Wet Tile/ Stone Saw and Stand. Failure to follow
all instructions may result in electric shock, fire and/or
serious personal injury.
To reduce the risk of mistakes that
could cause serious, permanent injury,
do not plug the tile saw into an electrical receptacle
until the following steps have been satisfactorily
completed:
•
Completely assemble the stand (See "Assembly" section).
•
Learn the use and function of the gravity folding stand and
all parts of the stand.
•
Review and understand all safety instructions and
operating procedures in this manual.
This product and some dust created by
power sanding, sawing, grinding,
drilling, and other construction activities may contain
chemicals, including lead, known to the State of
California to cause cancer, birth defects, or other
reproductive harm. Wash hands after handling.
Some examples of these chemicals are:
•
Lead from lead-based paints
•
Crystalline silica from bricks and cement and other
masonry products
•
Arsenic and chromium from chemically-treated lumber
Your risk from exposure to these chemicals varies,
CALIFORNIA PROPOSITION 65
•
Never put your fingers or hands in the path of moving
parts when folding and unfolding stand.
•
Never use a hand position where a sudden slip could
cause the fingers or the hand to get caught in pinch
points.
•
Find and read all the warning labels found on the stand.
- Indicates danger, warning or caution. It means
attention! Your safety is involved.
depending on how often you do this type of work.
To reduce your exposure, work in a well-ventilated
area and with approved safety equipment, such as
dust masks that are specially designed to filter out
microscopic particles. Avoid prolonged contact with
dust from power sanding, sawing, grinding, drilling, and
other construction activities. Wear protective clothing
and wash exposed areas with soap and water.
4