Installation And Connection - FONESTAR FO-459-TX Mode D'emploi

RECEIVER
1.- RX ID: Indicator of the current RX ID number.
2.- IR receiver window: Receive IR signal from remate control.
3.- Power indicator: LED indicator turn on when power on.
4.- TX CONNECTED: Indicate the input channel as a number, and when the channel of receiver as same
as the channel of transmitter, transmission connected.
5.- Power input: Connect with DC5V /3A power adapter.
6.- Data transmission indicator: Receive IR signal from remate control.
7.- HDbitT signal input: LED indicator turn on when power on.
8.- Connection indicator: Indicate the input channel as a number, and when the channel of receiver as
same as the channel of transmitter, transmission connected.
9.- IR: remote control receiver connection input.
10.- HDMI output: Connect with the display device.
11.- Reset button: Press far restarting the unit.

INSTALLATION AND CONNECTION

1. How to make a CAT5/5e/6 network cable
Follow the standard of IEEE-568B:
2. Connection diagram
2.1 Matrix configuration
NOTE : The switch must support IGMP function
1. white and orange; 2. orange; 3. white and green; 4. blue; S. white and blue; 6. green;
7. white and brown; 8. brown.
- 3 -
EN