Télécharger Imprimer la page
Chamberlain LiftMaster PROFESSIONAL 976LM SECURITY+ Mode D'emploi
Chamberlain LiftMaster PROFESSIONAL 976LM SECURITY+ Mode D'emploi

Chamberlain LiftMaster PROFESSIONAL 976LM SECURITY+ Mode D'emploi

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

FEATURES
For use with any SECURITY
an orange "learn" button.
Personalized Password: Up to 10,000 possible
combinations. Password can be easily changed if desired.
Temporary Password: Can be added for visitors or service
persons. This temporary password can be limited to a
programmable number of hours or a programmable number
of entries.
Rolling Code: While your password remains constant until
you change it, the code between the Keyless Entry and the
receiver changes with each use, randomly accessing over
100 billion new codes.
Operation: Opener activates when 4-digit password and
Enter button is pressed.
If wrong numbers are accidentally pressed, correction can be
made immediately. The Enter button will transmit only the
last four digits.
The Keypad will blink for 15 seconds after the password is
transmitted. During that time the Enter button can be used to
stop or reverse the door travel.
SETTING THE PERSONAL ENTRY PASSWORD
We recommend that you program your password now, before you install the Keyless Entry. Then you can test the reception
at the mounting location before you proceed further.
USING THE MULTI-FUNCTION DOOR CONTROL
1. Enter a four digit personal identification
number (PIN) of your choice on the keypad.
Then press and hold ENTER.
2. While holding the ENTER button, press and
hold the LIGHT button on the Multi-Function
Door Control.
3. Continue holding the ENTER and LIGHT
buttons while you press the push bar on the
Multi-Function Door Control (all three buttons
are held).
4. Release buttons when the motor unit lights
blink. It has learned the code. If light bulbs
are not installed, two clicks will be heard.
garage door openers having
Model 976LM, 976LMC Security
Wireless Keyless Entry
To prevent possible SERIOUS INJURY or DEATH from a moving
gate or garage door:
• ALWAYS keep remote controls out of reach of children. NEVER
permit children to operate, or play with remote control
transmitters.
• Activate gate or door ONLY when it can be seen clearly, is properly
adjusted, and there are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight until completely closed.
NEVER permit anyone to cross path of moving gate or door.
NOTICE: To comply with FCC and or Industry Canada rules, adjustment or modifications of this
receiver and/or transmitter are prohibited, except for changing the code setting or replacing the
battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
USING THE "LEARN" BUTTON
1. Press and release the "learn" button on motor
unit. The learn indicator light will glow
steadily for 30 seconds.
2. Within 30 seconds, enter a four digit personal
identification number (PIN) of your choice on
the keypad. Then press and hold the ENTER
button.
3. Release the button when the motor unit lights
blink. It has learned the code. If light bulbs
are not installed, two clicks will be heard.
Side two contains instructions for installing the Keyless
Entry, changing the personal entry password and
setting a temporary password.
1
WARNING
9
1
9
1
7
3
7
5
5
3
KG
KG

Publicité

loading

Sommaire des Matières pour Chamberlain LiftMaster PROFESSIONAL 976LM SECURITY+

  • Page 1 Model 976LM, 976LMC Security FEATURES For use with any SECURITY garage door openers having Wireless Keyless Entry an orange “learn” button. Personalized Password: Up to 10,000 possible combinations. Password can be easily changed if desired. WARNING Temporary Password: Can be added for visitors or service To prevent possible SERIOUS INJURY or DEATH from a moving persons.
  • Page 2 WARNING step 3. SPECIAL NOTE: The temporary password can ONLY be programmed to keypads working on a Chamberlain or To prevent possible SERIOUS INJURY or DEATH: LiftMaster Garage Door Opener. It WILL NOT work on • NEVER allow small children near batteries.
  • Page 3 Modèle 976LM, 976LMC Security CARACTÉRISTIQUES Pour utilisation avec les ouvre-portes de Security possédant un bou- Système d’Éntrée sans clé ton “learn” orange. Mot de passe personnalisé: Jusqu’à 10,000 combinaisons possi- bles. Le code peut être modifié facilement, si désiré. AVERTISSEMENT Mot de passe temporaire: On peut ajouter un mot de passe d’entrée temporaire pour les visiteurs ou les préposés au service.
  • Page 4 MENT programmable sur des claviers fonctionnant avec des ouvre- • Aviser immédiatement un médecin en cas d’ingestion de la pile. portes de garage Chamberlain ou Liftmaster. Il ne FONCTIONNERA PAS sur des claviers programmés à un récepteur externe. La pile 9 V devrait durer au moins un an.

Ce manuel est également adapté pour:

Liftmaster professional 976lmc security+Liftmaster security+ 976lmLiftmaster security+ 976lmcLiftmaster professional security + 976lmLiftmaster professional security + 976lmc