Troubleshooting - BASETech 2139577 Notice D'emploi

16. Troubleshooting

In purchasing this measuring device, you have acquired a product which has been designed to
state of the art and is operationally reliable.
However, problems and malfunctions may still occur.
This section tells you how to troubleshoot common issues:
Always observe the safety information in these instructions.
Error
The multimeter does
not work.
Check the status.
Repairs other than those described above should be performed only by an au-
thorised specialist.
If you have questions about the measuring device, please contact our technical
support team.
38
Possible cause
Is the battery empty?
The HOLD function is active
(display "H")
Have you selected the wrong
measurement mode (AC/DC)?
Did you use the wrong measure-
ment sockets?
Solution
Check the status.
Press the "HOLD" key again.
The symbol "H" disappears.
Check the display (AC/DC)
and select another mode if
necessary.
Check the measuring sockets.