Trolly (Optional); Overview; Assembling The Trolly - Norsup CYCLONE Serie Notice Originale

ROBOTIC POOL CLEANER TYPE CYCLONE

12. TROLLY (OPTIONAL)

12.1. OVERVIEW

The trolly is an optional accessory that makes it easy
to move the robotic cleaner and provides a mounting
site for the power and control unit.

12.2 ASSEMBLING THE TROLLY:

1. Attach the wheels to both sides of the trolly base
and fasten each wheel with the screw and install
the cover.
2. Assemble the two sections of the handle.
3. Attach the power and control unit housing by
clicking the upper tabs into the holes in the
handle.
4. Insert the handle into the trolly base. Click the
lower tabs of the power and control unit housing
into the trolly base.
5. Attach the remote control holder by inserting the
upper part into the trolly handle and turning the
holder downward until the lower part clicks.
6. Attach the cable of the power supply
7. Place the power and control unit cable in the
groove in the trolly base.
8. Place the upper part of the power and control unit
in the housing and push the lower part downward
until it clicks into the trolly base.
18 WWW.NORSUP.EU
Alterations which serve the technological progress as well as errors excepted!
ROBOTIC POOL CLEANER TYPE CYCLONE
NOTES
Alterations which serve the technological progress as well as errors excepted!
ORIGINAL MANUAL NORSUP 19