Pairing The Mobile Warning Unit; Displays During Operation - Linde Safety Guard Mode D'emploi

Pairing the mobile warning unit

If a mobile warning unit is within the pairing
zone of the industrial truck, the unit is paired
automatically with the display unit and muted.
NOTE
The pairing function must be activated by a
service partner.
 Move the mobile warning unit into the pair-
ing zone of the display unit.
The LED display (1) on the display unit lights
up green. The display unit does not issue a
warning message.
 To deactivate the pairing function, move out
of the warning zones of the industrial truck.
NOTE
Only one mobile warning unit can be paired
with the display unit at any one time.

Displays during operation

The components of the Linde Safety Guard
must not be operated when in working mode;
however, the displays must be observed. The
warnings and the operating status that are dis-
played when the Safety Guard display unit
makes contact with other components of the
system are described below.
Operating Instructions - 3008011701 EN - 11/2019

1
1
Operation
Operation
2 3 4
LSG_0042
4
51