PUR PD-HEPA375VSC Manuel D'utilisation page 12

ATTENTION: PRODUCT OWNER
REMOVE LID BEFORE PLUGGING UNIT IN.
IF THIS UNIT HAS THE NON-TAMPERABLE LID, UNDO THE
(2) SCREWS WITH SCREWDRIVER OR SCREW GUN USING
TORQUE #4 (not higher).
REMOVE CARBON PREFILTER BLANKET FROM
INSIDE OF CABINET, PART #W4-0855, AND
INSTALL ON THE OUTSIDE OF HEPA FILTER.
REMOVE INNER CARBON BLANKET FROM INSIDE
CABINET, PART #W4-0810, AND INSTALL ON
INSIDE OF HEPA FILTER.
REFER TO OWNER'S MANUAL FOR
INSTALLATION INSTRUCTIONS.
Questions?
Call 416-410-3450